Bud of troyand with foamirana meister. Meister-class wine with buds of trojans (foamiran)
Often for the creation of flower compositions, brooches, hairpins, or both, you need not only empty, ale and small buds. In your master class, you know how to grow a bud from foamiran with your own hands. As an example, take one of the most popular colors: trojandium bud, lily bud, mallow and eustomi bud. The bud of the lily will grow to a great rosemary, which is more beautiful than vicoristing the composition of compositions. Other quotes dribnishi and pididut for design embellishment with foamiran.
How to spawn a lily bud from foamiran: cover photo
What do we need in order to prepare a lily bud:
- white and green foamiran;
- foil;
- orange stick for manicure;
- thin and thick dry;
- oil and dry pastels of erysipelas and green vіdtinkіv, vologі servvetki and sponge;
- tape stitch.
For the creation of a bud, we used the foil to create such a basis. Rozmir can be varied for bajannyam. We need a lot of such supports for buds.
Three coats of hot glue are applied to the base of the foil and let it cool.
Then it is necessary to take a piece of white foamiran and glue the base.
Such a bud we have viyshov. It is protonated with a yogo horn olive pastel and a kіnchik with a teip stitch.
I prepared an axis of such buds for my little ones.
From the green foamiran, the leaves are visible. You can work in different sizes. Ale, unravel a small amount of leaves, a skin bud and a flower, you need to spread 2-3 arches. So, as I put a tick in a bouquet, then the leaves grow only under the buds. Yakshcho you just want a little lily under a voucher of obov'yazkovo may be leafing.
We apply the veins of the leaf with a stick.
We take two kinds of oil pastels and we sink a leaf with a sponge from two sides.
Let's sweat the edges of the leaf of the lily, the trochs are vibrating, burning the leaf navpіl.
Litoni is glued all over the sheet.
So, like a lily’s stovbur is not thin, but I don’t have such a thick dart, I’m a vicarious cocktail stick. Kindly close with a bud.
Before that, as soon as a little leaf creaks, a bud and sepals lightly protonate green pastel. Robimo 2 - 3 turns of tape with a line and a sheet is applied. Then we wind the sheet and after the sheet we work 2-3 turns.
Then we apply another sheet and krіpimo against the first sheet. Robimo I am renewing 2-3 turns.
So we continue to creep the buds of the lily. Kіlkіst їх lie down in order, like a twig you would like to take away.
Bud from foamiranu flower mallow
We take foil and form a bag for the base of the bud. Їх green foamiran virіzaєmo sepals for the bud. Square 3 * 3 cm virіzaєmo chotiri-leaf 2 pieces and rubbed between fingers.
The base of the bud is fixed on the ground and pasted over the base with sepals, so that the foil was not visible. Drіt is processed with foamiran or teip with a stitch of sprat balls.
Bud troyandi with foamiran: two design options
The bud of trojand is one of the most popular. Vіn vikoristovuєtsya for embellishment of impersonal virobіv and compositions with foamiran, even troyanda is a universal flower and can be practically combined with any kind of kvіtіv. We marvel at this part of the master-class, like a bud of trojand with a few pellets and a vicarious universal form.
Yak zrobiti bud trojandi z okremi pelyustok
What do we need in order to prepare a Trojan bud
- yellow marshmallow foamiran;
- foil;
- thin and thick dry;
From the yellow foamiran, we can see the pellets in the sight of the specks, the different roses for the trojans. For a bud, we need 3 small petals and 4 larger petals. We process them with smoothing powder and heating the edges with a lighter, twisting the pellets for more
From the foil we can work the basis for the trojand at the sight of the droplets and glue the basis onto the drіt.
We take two pellets and glue a drop of foil, glue the pellets one against one, curling the foil, the foil that is left out is curled with the third pellet.
We take the pellets for a larger size and glue them on the stake on one level for the height of the overlap.
Trojandy bud with universal shape
What do we need in order to prepare a bud with foamiran for trojand:
- buzkovy foamiran;
- foil;
- thin and thick dry;
- hot glue, as well as universal or second glue.
From the buzkovy foamiran, there are 3 pelyustkovy universal stakes for the bud of trojand.
To fold the bud of trojandi, we make the basis of the ticket from the foil (take a piece of foil 10 * 30), it is good to squeeze it and vir_vnyuemo yogo. Let's sweat the whole base from the foil, smear it with glue from the thermal gun, so that the bud becomes equal.
Then we small with a pelyustkovy stake, for which the pelyusts are not twisted, we glue the base so that the foil is not visible. We take the step of the little pelyustkov small and glue it so that the name of the pelyustka marveled at the gates. Pelyustki povinnі roztashovuvatisya on the same line with the pelyustki of the first row, for the demand of the pelyust you can pull up the trochs, or, on the other hand, lay the base.
The third and fourth of the pelyustkovі stake are smeared against the base, lift the pellusts and press to the base. We glue the pellets in such a way that the stink pellets are rolled out in checker order. Great pelyustkovі kola podkleyyuemo to the foundation, lolling pelyustkov in check order. If necessary, you can lift the pelyustok and stick it, or press it to the ground. The axis of our bud is ready from foamiran.
How to grow a eustomi bud with your own hands: MK
What do we need in order to prepare the eustomi bud.
- white and green foamiran;
- foil;
- tovstii drіt;
- hot glue, as well as universal or second glue;
- oil and dry pastels of green color, water servlets and sponge;
- tape stitch.
For a bud of a flower eustomi virizaemo 5 petals with a size of 1.5 cm like a droplet. Also, we prepare the basis for looking like droplets from the foil, or the polystyrene is glued to dry. The pellusts are folded with an accordion, rubbed between the fingers, straightened, not richly vibrating.
We glue these 5 pieces so that the top of the pellet converges and the bottom diverges. Vіyalom, scho viyshov, pasted over the base - a droplet.
Pieces of tickets - not obov'yazkovo tedious plastic succulence over bright tones. Kviti can work for what ever! Beads, plastic beads, papier, fabrics, stitches. I, obviously, the king of the middle of these materials is foamiran. The axis of why the lives come out, as if you are alive, then it’s not worth it! Trojans especially come out. How to grow a Trojan bud is a good topic, here you need to change a little bit of robotic technology.
Meister class on a bud of troyand from foamiran
Choose the appropriate color of foamiran for your trojands and buds and obov'yazkovo, hand-wash the garne and glue (preferably a glue gun). Put another order of pieces of foil for the base of the buds. That knife - go without them!
- Create paper templates for pellets at the sight of the drops and the green (at the sight of the star)
- For one bud, you need two rosemary of pellets, three skin ones each. Apply to heated laundry. Rizny foamiran reacts in its own way, so for the cob turn on an undesirable piece, up to a temperature that is optimally attached to yours. Apply a feather for a couple of seconds, and then twist the wide part with your fingers.
- Zrobivshi 6 pelyustok, razgornit їх. Gently stink easily torn!
- Kіntsi zіrochki porіzhte great fringe. So it is applied on the prask, and then twisted.
- Wrap a piece of white foil with foamiran.
- Sharpen the base of the bud with small pellets, gluing them with glue overlapping one on one.
- Glue large pelyust on top.
- Glue is dripped onto the middle of the sepals and a bud is pressed.
- The edges of the green are also pressed in a few places to the bud with glue at once.
- Well, in order to make a trojan, you only need to cut more pelyusts, approximately the same - 3-4 pieces of skin rosemary, the stench will go in rows and trochs in a spiral.
Buds of troyandi with foamiran: technique for beginners
Another MK from cover photo with description. The principle is already familiar to you, try to change the color of the buds a little, and marvel at what you see.
- Behind the template, there are 5 of the same details for the bud and the sepal:
- Rozіgіtіy on prastі pelyustі need to put on such a twisted form:
- Axis yak stinks look at once:
- Like in the front MK, you need to cut the edges of the leaves:
- The hot sheet is also in the middle:
- Tonuvati leaflets are not obov'yazkovo. And in a flash, you can work not with farbs, but with shadows for povik - take note:
- Our buds will be three stalks, so in a piece of foil you need to make a hole with a knitting needle or a skewer:
- Take the tovst mіtsny drіt, use pliers to make a loop on the tip. Insert a loop in the foil, dear. As if you don’t have a dart, you can’t work around the dirochka, insert a skewer into the skewer, in front of it just put some glue on the tip:
- We take the pershu pelyustok and wrap it around the foil, putting the glue in front:
- Wrap yoga around, so that the foil is practically attached:
- Other pellets just need to be glued tightly:
- Glue the first sheet, cut the fringe of the troshka:
- Glue the other leaves so that the stench evenly spreads around the bud, it’s okay, just go in one on one, smut, so that there is no enlightenment:
- The stalk of the finished bud can be wrapped with a floristic stitch, a long thin female foamiran or floss threads. And you can leave it, like є:
- From faceless buds and trojands, the bouquet looks so right!
Small bud without foil
As the lessons of the past rose, how to grow a bud with a base of foil, then there are instructions about those, how to grow without it. Until then, these buds will be very small, for the creation of a bouquet or a bouquet named.
- Robimo great number of pelyustok, like the first MK, the skin is applied to praski:
- About 5 cm of the winder is wound on the glue on the first pellet:
- І other, І third past:
- After 5-6 petals, do not glue the top, but add the name of the daedal more:
- A leather bud will be approximately 8 pellets:
- Sepals, leaves, fringe:
- As a textured stencil for leaflets, after heating the leaves, it is applied to a new window, then they will stink like a living:
- We glue the greens to the bud for a second glue:
- If you put together a lot of such buds with a teip-string, taking as a basis tovsty drіt, then you will see a garnier wreath or a bow:
Ideas for creativity
To marvel at the inspiration, like more buds create mastrins from foamiran, and then decorate with them:
Round buds:
A small bouquet at the sight of the panel:
For lovers of namist - a necklace with buds of trojans:
Watch the video with the introductory videos from the preparation of tickets for foamiran:
Foamiran ( speed fom, fom vіd English foam - pina) - the same material, which includes ethylene and vinyl acetate. Yogo vikoristovuyut for the creation of pidrobok, іgrashok, kolorіv. The material has an elastic structure, which allows it to be stretched to the required shape. The positive power of Thomas is the same: the invariance of color for the trival interval of an hour, the resistance to water, the softness of the dotik structure. Pokrokov's instruction for the creation of a bud of trojand from a great foamiran is added to our article!
Let's work the lower bud of trojand from foamirana with your own hands
Pratsyuvati with fomom is simpler, wines are easily filled with the required form. It is especially beautiful that nature comes out of this material. So that it is easy and easy to learn how to make bouquets with foamiran, for the handymen of preparing master-class reports.
Otzhe, for a Trojan bud you need:- Foamiran green and whether it be any other color, which was worthy.
- Glue gun.
- Foil.
- Drіt or skewer for the stem.
- Knives.
- Paper and olive for vikryka.
- In order for the bud to be distinguished from the expansion of the trojandochka, it is necessary to create a base from foil or plasticine (the middle of the bud). For whom it is necessary to twist a small droplet. Let's put it together with a skewer for additional glue, or just pierce the base.
- Next prepare templates for details. On a thin paper, paint 2 droplets of a different size and a star for the future sepals. On a large leaf of hostria, it is necessary to see. The next thing is to transfer it to foamiran. Please note that I will need a number of details for the ticket.
- So that the future Troyanda looked more realistic, twisted the peluses (remembered) and stretched the trochs. Behind the banners, the material can be embellished with watercolor farbs.
- The sepals are more easily sprouted. Tear the cloves of the virizano zirka, tear the trochs of their trochs and twist them.
- Start the process with small details. Apply a small amount of glue to the middle of the pellet and burn the base (foil) so that the stems stick out.
- Stepping into the first paddle in half, then glue the steps in the same order.
- If the base is completely burnt with foamiran, the rounded edges of the parts that are missing are slightly twisted and glued following the same principle. A lot of pelyustok lie down in the appearance of trojandi. Vaughn may not have blossomed yet, but already more fluffy.
- Coat the middle of the prepared sepal with glue and glue to the base of the trojand. Fix the teeth closer to the bud.
For more detailed instructions for handicrafts, a selection of initial photos has been prepared.
Dekilka options for creating a composition with foamiran
Kviti z foma go out the other side of the garni. They can embellish a vase, a photo frame, a cat, a flower potter, a wreath and so on. Once ready, you can paste any object. Modern fashionistas sheathe their handbags with such embellishments.
Video on the topic of articles
From such material, like foamiran, you can create a rich variety of flowers and unusual pieces, embellish it otherwise. On which master class will end. Lack of luck for handicraftsmen and good work.
In order to understand the whole process of creating such a masterpiece, like a Trojan bud from a miraculous foamiran, a video was made. Having looked over all the material, a leather lover of manual work can add a wonderful composition to her collection.
Foamiran ( speed fom, fom vіd English foam - pina) - the same material, which includes ethylene and vinyl acetate. Yogo vikoristovuyut for the creation of pidrobok, іgrashok, kolorіv. The material has an elastic structure, which allows it to be stretched to the required shape. The positive power of Thomas is the same: the invariance of color for the trival interval of an hour, the resistance to water, the softness of the dotik structure. Pokrokov's instruction for the creation of a bud of trojand from a great foamiran is added to our article!
Let's work the lower bud of trojand from foamirana with your own hands
Pratsyuvati with fomom is simpler, wines are easily filled with the required form. It is especially beautiful that nature comes out of this material. So that it is easy and easy to learn how to make bouquets with foamiran, for the handymen of preparing master-class reports.
Otzhe, for a Trojan bud you need:- Foamiran green and whether it be any other color, which was worthy.
- Glue gun.
- Foil.
- Drіt or skewer for the stem.
- Knives.
- Paper and olive for vikryka.
- In order for the bud to be distinguished from the expansion of the trojandochka, it is necessary to create a base from foil or plasticine (the middle of the bud). For whom it is necessary to twist a small droplet. Let's put it together with a skewer for additional glue, or just pierce the base.
- Next prepare templates for details. On a thin paper, paint 2 droplets of a different size and a star for the future sepals. On a large leaf of hostria, it is necessary to see. The next thing is to transfer it to foamiran. Please note that I will need a number of details for the ticket.
- So that the future Troyanda looked more realistic, twisted the peluses (remembered) and stretched the trochs. Behind the banners, the material can be embellished with watercolor farbs.
- The sepals are more easily sprouted. Tear the cloves of the virizano zirka, tear the trochs of their trochs and twist them.
- Start the process with small details. Apply a small amount of glue to the middle of the pellet and burn the base (foil) so that the stems stick out.
- Stepping into the first paddle in half, then glue the steps in the same order.
- If the base is completely burnt with foamiran, the rounded edges of the parts that are missing are slightly twisted and glued following the same principle. A lot of pelyustok lie down in the appearance of trojandi. Vaughn may not have blossomed yet, but already more fluffy.
- Coat the middle of the prepared sepal with glue and glue to the base of the trojand. Fix the teeth closer to the bud.
For more detailed instructions for handicrafts, a selection of initial photos has been prepared.
Dekilka options for creating a composition with foamiran
Kviti z foma go out the other side of the garni. They can embellish a vase, a photo frame, a cat, a flower potter, a wreath and so on. Once ready, you can paste any object. Modern fashionistas sheathe their handbags with such embellishments.
Video on the topic of articles
From such material, like foamiran, you can create a rich variety of flowers and unusual pieces, embellish it otherwise. On which master class will end. Lack of luck for handicraftsmen and good work.
In order to understand the whole process of creating such a masterpiece, like a Trojan bud from a miraculous foamiran, a video was made. Having looked over all the material, a leather lover of manual work can add a wonderful composition to her collection.
I added my dosvid to the preparation of tickets from corrugated paper and the preparation of leaflets in the style of scrapbooking.
Flowers from foamiran are even lighter and more beautiful, they can embellish the headband, make a boutonniere, or decorate the hair on the hair. The vouchers were already worthy of donets, and she already put the gum on her hair. If she beat the trojans, she shook it off happily, spoofing that a new garna, a hairpin or a gum for hair, would appear at her without a hitch. Well, what do you think, little fashionista.)))
Bud of troyand with foamirana. Master-class for pochatk_vts_v
We need:
- foamiran (I have Iranian)
- glue gun
- scissors
- foil
I did not bathe rich foamirana. Ale, the work of this material was more than worthy of me. I bought white and green foamiran. Iranian foamiran.
In the photo of the wines, you clearly look pale lower in life, that day is gloomy this year, the photo is not as bright as I wanted. Prote I zrobila troyandochki, which is more than happy.
For a trojan, we need 3 pellets 2.5 by 2.5 cm and 3 pellets 3 by 3 cm.
So I painted the sepal pattern at the shape of the star about 2.5 cm at the edge of the leather.
Now we turn the squares diagonally and begin to see the dot. Tse and there will be trojans.
It is possible to cut the skin of the trojandi okremo pellets, but for me it’s more swedish and simpler. The pellust comes out in the form of a droplet. We need three small ones and three bigger ones.
Now we give the shape of the pellets. Let's turn on the prask. Do not play prask, let it be warm and not very hot.
For a few seconds, we apply a pellust to the prask. Then, with an accordion, we pick up the wide edge of the pellust and scroll after the year arrow 3-4 times. Zreshtoyu, axis scho to go out.
I so robimo with 6 pellets. Let's unroll the pellets and trochs stretch the middle. Tse menі chimo guessed the robot with corrugated paper. tezh go to finish the garni, the same principle of work is similar.
It's true, on the vіdmіnu vіd fоamiranu, corrugations of papira are not torn. And I tore the axis of the pellust 2 from the foamiran, but all the carelessness.
The axis of the trojans appears like that.
Now let's get down to the preparation of the sepals. For the preparation of the chacholists, I wielded a star. At the edges I make small incisions. I know that it’s better to drown, but I didn’t hurt anyone.
Before the speech, before going to the market, they told me that you can sink the leaves with the best shadows for povik. Note. I haven't tried it, but I think you can try it.
If all the edges are trimmed with scissors, I apply the sepals for a couple of seconds until hot dust, I take everything in a bundle and twist the sprat behind the year's arrow. Rozgortaemo sepals.
As a result, they appear so beautiful, and smut-believable sepals, like those of the right buds of trojans.
If everything is prepared, the preparation itself takes a lot of time, you can proceed to picking a bud of troyand from foamiran with your own hands.
To close the bud, we need a small piece of foil. I burnt the foil and gave it small drops. The rosemary of the droplets from the foil is guilty of such a thing, that it was completely covered with pelyusts.
I need a small piece of white foam to close the foil. In this rank, a bud of trojandi is formed. I'll show you right away how I can fight.
I apply hot glue to the edges of the rectangle and apply it to a drop of foil. It was necessary that the edges fit snugly and the foil did not shine through.
Glue is applied to the lower edge of the pellet. Since you don't have a glue gun, you can try the glue for a moment. In this way, a bud is formed.
After gluing the first row of pellets, I glue another row of pellets 3 by 3 cm. Another row of pellets should be 2-3 mm. more for the first. A bud comes out of 6 petals.
Glue is applied to the lower edge of the petals and glued down to the bud.
The axis looks like the turning beak of a Trojan bud from foamiran.
The finished bud is glued to the sepals. In the middle, drop a drop of glue and apply triplets.
I'll ask again, I don't know how I'm dripping hot glue and glue. To the one who took the photo herself, but it’s not easy at all. I'll show him with my finger where I put the glue. There were no helpers this year.)))
So dodatkovo glue fixing the sepals to the bud of the trojand. Yak in the photo.
As a result, such buds of trojand from foamiran appear. I crushed 3 buds. My daughter changed my mind, that for maistrin-pochatkіvtsі it was necessary to make beautiful trojandochki.)))
Truth is, from one in me a great trojan was born. I added 2 more rows of pellets. One of the pellets is 3.5 by 3.5 cm, and then a row of pellets is 4 by 4 cm.
From such vouchers you can enter a garniy vinochok. If you like rims and wines with foamiran quilts, then I’ll get to know Tamari Chervinskaya’s master class. Meister-class from cover photos. Upevnena, if you have є bazhannya, then you have everything!
Create with love! I have been able to work with foamiran, alone, it takes more than an hour for my creativity.))) Ale Trojans come out like alive.