Modular origami - snake. Origami snake scheme Yak robiti cobra with modules
Origami. Modular viper. Cobra. Meister classWhat kind of snake do people call "a snake with a hood"? Shvidshe for everything, zustrіch іz tsієyu living zmієyu - cobra - to inflict on you an unforgettable enmity. The cobra is attacked by a gentry snake, it does not attack without attack. Folding cobra in the technique of a modular origami will not only be safer, but rather hoarsely.
In my master-class, the folding of the so-called spectacled snake (well-looking, cobras) will be shown in a pokrokovo way, which may have a characteristic little thing on the hood, which guesses the eyepieces are turned upside down. The most important folding of the cobra is not the collection itself, but the molding of the residual form of the fighting snake. The second folding is the preparation to make a large number of knitted modules. For this model їx, 1519 pieces were needed. Middle modules: 4 black (for eyes), about 1/3 white (snake belly); Other modules - red color (basic) and yellow color. So, for example, read the note.Folding coat
Representation of the folding option - tse folding into two balls. This way of adding modules allows you to pick up different babies from the skin side. In this situation, the cobras live in the best of the two modules. And the back is selected from the color modules: red and yellow. Take care that the modules of the lower ball (white) lie on the long side, and the modules of the upper ball (colored) lie on the short side.
The number of modules in the lower row is 4, and in the upper row - 5. I will call such a design "one row".
Let's take another sub-row. The shards of this variant of the modular snake do not have a special little baby on the tulub, then the color of the color modules is selected randomly (with the red color being over-important).
Selected 10 sub-rows:
Selected 20 and 40 rows:
For the sake of clarity, I’ll take 40 rows at the colo
Otzhe, gave 60, 80 and 100 rows. Tulub cobri zіbrano:
KhvistIf one sub-row of the coat will cover 9 modules (4 white + 5 color), the first sub-row of the tail will cover 7 modules (3 white + 4 color). Dali in the photo are shown above the extreme modules of the first row of the tail.
... I will pick up the first row of the tail ...
... five first rows of the tail.
From 6 to 10 sub-rows of the tail there will be 5 modules each (2 white + 3 colored).
From the 11th to the 15th row of the tail, there will be 3 modules each (1 white + 2 colors).
Tail tip - 5 modules.
Head that hood cobraThe “hood” of the cobra takes on like a head, it’s more that the spectacled snake has little ones on the neck to stare like eyepieces on the eyes. In nature, the little ones are built to introduce an attacker behind the enemy into Oman. Also, the “hood” is wider than the tulub, so it’s better to incrementally increase the number of modules in the lower rows. If one sub-row of the hood contains 9 modules (4 white + 5 color), then the first sub-row of the hood contains 11 modules (5 white + 6 color). Quickly install 5 two modules:
The next photo (in blue color) shows the rearrangement of the last modules. Be respectful!
Install all 6 color modules of the first row of the cobra hood.
Another sub-row of the hood contains 13 modules (6 white + 7 colored ones).
Dali: 3rd row - 15 modules (7 + 8); 4th row - 17 modules (8 + 9). Starting from the 5th row, we add a characteristic little spectacled snake. Return respect for two white modules in the center of the color row. 5th row - 19 modules (9 + 10).
So, from the other side you can choose color modules for picking smog. In this variant of the modular cobra, only one such smuga was chosen.
Rows 6 to 9 are picked up for the scheme - 21-23-25-27. 10th row - 27 modules. The photo shows 9 new rows and the ear of the 10th row:
Rows 11-ї and 12-ї for 27 modules. At the 12th row, the folding of the pardon eye on the captura begins. The photo shows the ear of the 13th row - 14 modules are installed.
Zagalom at the 13th row 29 modules (14 + 15). Starting from the 14th row, we change the number of modules step by step, the docks do not reach the head. The next photo shows the ear of the 14th row (13 modules) and those, as the extreme modules of the color side are installed (shown in blue). Be respectful!
The next photo shows the folding of the little one, both from one, and from the other side of the hood of the doti, but the number of modules in the lower row does not reach 11 (5 + 6).
The folding of the hood is finished, the folding of the head is beginning. We add one more row of 11 modules (5+6), then 13 modules (6+7) and 15 modules (7+8).
The next rows (closing) are chosen according to the scheme 13-11-9-7-5-3.
The snake is ready! Axis out for the whole dovzhina!
Neither when prepared, nor when killed, the cobras did not beat the glue. So that when the snake was cut, the modules did not separate, skip the knot of the snake thread. The head is easily inserted into the gaps between the modules. Krok syazhka 5-8 modules. After that, as soon as the residual look is given, the thread can be tidied up.
Nezabarom all, it seems to be smut holy in the rotation, in advance of the day we will try to choose a modular origami snake. Navit for beginners is such a simple modular snake on the shoulder.
Meister class of a large origami snake
Let's take a closer look at the scheme of this modular origami snake.
In the front, we prepare knitted modules in a number of colors:
- 67 greens;
- 36 red ones;
- 12 zhovtih;
- 3 orange;
- 2 blue;
- 1 red tongue.
Now let's take a look at the report, how to choose the origami from the modules in the look of the snake:
1. If the robot was made faster, that design was more stable, all modules are attached one to one behind the additional PVA glue.
2. The robot was traced from the head. Appropriate to the scheme of a modular origami snake, the first row is formed from one module, which starts expanding from another row. On half of the first row we put the first module of the other.
3. Now you need to add another module.
4. Continue to expand the snake, as shown in the origami scheme of modules. Before the first module of another row, the first module of the third is fixed.
6. Add the third module of the third row.
7. The result has an absolutely cool look of the modular origami from the paper of the snake of attacks:
8. Now the fourth row is to be expanded for additional four modules.
9. At the fifth row, the eyes of the snake appear. There are already five modules.
10. Starting from the 6th row, change the number of modules to four: for the first module of the 6th row, it is necessary to introduce the first and one more half of the other module of the 5th row.
11. The next two modules are placed in the greatest way.
12. On the three "tails" of the 5th row, which are left out, put the fourth module of the 6th row.
13. On the 7th row, the number of modules must be changed to four.
14. On the 8th row, there may be more than two modules left.
15. 9th row I am expanding with three modules. At any stage of the selection of a modular origami snake, you can work a viper.
16. From the 11th row, our snake begins to unfold. Robimo zsuv right-handed. For this, we put on the module the right-handed half of the module in the 10th row, like with expansion.
Origami. Modular viper. Cobra. Meister classWhat kind of snake do people call "a snake with a hood"? Shvidshe for everything, zustrіch іz tsієyu living zmієyu - cobra - to inflict on you an unforgettable enmity. The cobra is attacked by a gentry snake, it does not attack without attack. Folding cobra in the technique of a modular origami will not only be safer, but rather hoarsely.
In my master class, the folding of the so-called spectacled snake (well-looking, cobras) is shown in a pokrokovo way, which may have a characteristic little thing on the hood, which guesses the eyepieces are turned upside down. The most important folding of the cobra is not the collection itself, but the molding of the residual form of the fighting snake. The second folding is the preparation to make a large number of knitted modules. For this model їx, 1519 pieces were needed. Middle modules: 4 black (for eyes), about 1/3 white (snake belly); Other modules - red color (basic) and yellow color. So, for example, read the note.
Folding coat
Representation of the folding option - tse folding into two balls. This way of adding modules allows you to pick up different babies from the skin side. In this situation, the cobras live in the best of the two modules. And the back is selected from the color modules: red and yellow. Take care that the modules of the lower ball (white) lie on the long side, and the modules of the upper ball (colored) lie on the short side.
The number of modules in the lower row is 4, and in the upper row - 5. I will call such a design "one row".
Let's take another sub-row. Since this variant of the modular snake does not have a special little baby on the tulub, then the color of the color modules is chosen randomly (with the red color being overdone).
Selected 10 sub-rows:
Selected 20 and 40 rows:
For the sake of clarity, I’ll take 40 rows at the colo
Otzhe, gave 60, 80 and 100 rows. Tulub cobri zіbrano:
Khvist
If one sub-row of the coat will cover 9 modules (4 white + 5 color), the first sub-row of the tail will cover 7 modules (3 white + 4 color). Dali in the photo are shown above the extreme modules of the first row of the tail.
... I will pick up the first row of the tail ...
... five first rows of the tail.
From 6 to 10 sub-rows of the tail there will be 5 modules each (2 white + 3 colored).
From the 11th to the 15th row of the tail, there will be 3 modules each (1 white + 2 colors).
Tail tip - 5 modules.
Head that hood cobra
The “hood” of the cobra takes on like a head, it’s more that the spectacled snake has little ones on the neck to stare like eyepieces on the eyes. In nature, the little ones are built to introduce an attacker behind the enemy into Oman. Also, the “hood” is wider than the tulub, so it’s better to incrementally increase the number of modules in the lower rows. If one sub-row of the hood contains 9 modules (4 white + 5 color), then the first sub-row of the hood contains 11 modules (5 white + 6 color). Quickly install 5 two modules:
The next photo (in blue color) shows the rearrangement of the last modules. Be respectful!
Install all 6 color modules of the first row of the cobra hood.
Another sub-row of the hood contains 13 modules (6 white + 7 colored ones).
Dali: 3rd row - 15 modules (7 + 8); 4th row - 17 modules (8 + 9). Starting from the 5th row, we add a characteristic little spectacled snake. Return respect for two white modules in the center of the color row. 5th row - 19 modules (9 + 10).
So, from the other side you can choose color modules for picking smog. In this variant of the modular cobra, only one such smuga was chosen.
Rows 6 to 9 are picked up for the scheme - 21-23-25-27. 10th row - 27 modules. The photo shows 9 new rows and the ear of the 10th row:
Rows 11-ї and 12-ї for 27 modules. At the 12th row, the folding of the pardon eye on the captura begins. The photo shows the ear of the 13th row - 14 modules are installed.
Zagalom at the 13th row 29 modules (14 + 15). Starting from the 14th row, we can change the number of modules step by step, the docks do not reach the head. The next photo shows the ear of the 14th row (13 modules) and those, as the extreme modules of the color side are installed (shown in blue). Be respectful!
The next photo shows the folding of the little one, both from one, and from the other side of the hood of the doti, but the number of modules in the lower row does not reach 11 (5 + 6).
The folding of the hood is finished, the folding of the head is beginning. We add one more row of 11 modules (5+6), then 13 modules (6+7) and 15 modules (7+8).
The next rows (closing) are chosen according to the scheme 13-11-9-7-5-3.
The snake is ready! Axis out for the whole dovzhina!
Neither when prepared, nor when killed, the cobras did not beat the glue. So that when the snake was cut, the modules did not separate, skip the knot of the snake thread. The head is easily inserted into the gaps between the modules. Krok syazhka 5-8 modules. After that, as soon as the residual look is given, the thread can be tidied up.
In total, there are close to 2300 modules for such a snake. Of these, green - about 1200 modules (19 sheets of A4), yellow - 800 (12.5 sheets of A4), red - 146 (2.3 sheets of A4), erysipelas - 150 (2.3 sheets of A4), black - 2 modules . . Modules with a size of 1/64 arch A4 - one arch A4 is divisible into 64 parts. To take the module with a size of 1/64, you need to divide the long side into 16 parts, and the short one into 4 parts. Like a part of the work more - the snake will see the great one.
It's no secret that New Year 2013 is the Church of the Serpent. I want to decorate the apartment like a svyatkovo. There is nothing simpler than that, if you want a few volodiete beginners of the modular origami. And let the river be so yaskravim yourself, like a snake.
In total, there are close to 2300 modules for such a snake. Of these, green - about 1200 modules (19 sheets of A4), yellow - 800 (12.5 sheets of A4), red - 146 (2.3 sheets of A4), erysipelas - 150 (2.3 sheets of A4), black - 2 modules . . Modules with a size of 1/64 arch A4 - one arch A4 is divisible into 64 parts. To take the module with a size of 1/64, you need to divide the long side into 16 parts, and the short one into 4 parts. Like a part of the work more - the snake will see the great one. We will glue the modules with PVA glue.
We begin to work the snake from the head:
1 row - 1 green (far - h) module
2 row - 2 s
3 row - 3 s
4 row - 4 z
5 row - 5 z
6 row - 5 z
7 row - 6 z
8 row - 7 z
9 row - 8 z
10 row - 9 z
11 row - 8 z
12 row - 9 z
13 row - 8 s
14 row - 9 z
15 row - 8 z
16 row - 3 z 1 chervoniy (dali -k) 3z
17 row - 1 z 2 zhovtikh (far - f) 2 z 2 f 1 z
18 row - 1 h 4 f 1 h 4 f 1 h
So, the head looks from the reverse side.
We continue to pick up the head, as if step by step to go over to the hood of the cobra:
19 row - 1 s 4 f 2 s 4 f 1 s
20 row - 5 w 1 w 5 w
21 row - 6 w 2 w 6 w
22 row - 1 z 6 f 1 z 6 f 1 z
23 row - 7 w 2 w 7 w
24 row - 1 z 7 f 1 z 7 f 1 z
25 row - 1 s 8 f 2 s 8 f 1 s
26 row - 4 f 1 to 4 f 1 s 4 f 1 to 4 f
27 row - 1 s 3 f 2 to 3 f 2 s 3 f 2 to 3 f 1 h
28 row - 3 x 1 to 1 black 1 to 3 x 1 x 3 x 1 to 1 black 1 to 3 x
29 row - 1 s 2 f 4 to 2 f 2 s 2 f 4 to 2 f 1 s
30 row - 3 w 3 to 3 w 1 w 3 w 3 to 3 w
31 row - 1 s 3 f 2 to 3 f 2 s 3 f 2 to 3 f 1 h
32 row - 4 f 1 to 4 f 1 s 4 f 1 to 4 f
33 row - 1 s 8 f 2 s 8 f 1 s
34 row - 9 w 1 w 9 w
35 row - 1 h 7 f 2 h 7 f 1 h
36 row - 8 w 1 w 8 w
37 row - 1 h 7 f 2 h 7 f 1 h
38 row - 8 w 1 w 8 w
39 row - 1 h 7 f 2 h 7 f 1 h
40 row - 1 h 7 f 1 h 7 f 1 h
41 row - 1 s 6 f 2 s 6 f 1 s
42 row - 1 h 6 f 1 h 6 f 1 h
43 row - 1 h 5 f 2 h 5 f 1 h
44 row - 1 z 5 f 1 z 5 f 1 z
45 row - 1 s 4 f 2 s 4 f 1 s
46 row - 1 h 4 f 1 h 4 f 1 h
47 row - 1 h 3 f 2 h 3 f 1 h
48 row - 1 h 2 f 3 h 2 f 1 h
49 row - 1 s 1 f 4 s 1 f 1 s
50 row - 7 z
51 row - 8 z
52 row - 6 z
53 row - 3 st 1 to 3 st
54 row - 2 z 2 to 2 z
55 row - 2 s 3 to 2 s
56 row - 1 w 1 w 2 to 1 w 1 w
57 row - 1 w 3 w 1 w
58 row - 1 s 1 f 2 s 1 f 1 s
59 row - 1 s 1 f 1 s 1 f 1 s
Axis, you have little to see. The hood is obov'yazkovo pіdkleyuvati, іnakshe will not be trimmed
Now we choose the cobri toenail:
1 row - 1 erysipelas (dali - r) 1 s 2 w 1 s 1 r
2 row - 1 r 1 z 1 f 1 z 1 r
3 row - 1 to 1 p 2 s 1 p 1 to
4 row - 1 r 1 z 1 f 1 z 1 r
5 row - 1 r 1 z 2 f 1 z 1 r
6 row - 1 s 1 f 1 s 1 f 1 s
7 row - 1 s 1 f 2 s 1 f 1 s
8 row - 1 w 1 w 1 to 1 w 1 w
9 row - 1 w 1 w 2 to 1 w 1 w
10 row - 1 w 1 w 1k 1 w 1 w
11 row - 1 s 1 f 2 s 1 f 1 s
12 row - 1 s 1 f 1 s 1 f 1 s
13 row - 1 p 1 z 2 f 1 z 1 p
14 row - 1 r 1 z 1 f 1 z 1 r
15 row - 1 to 1 p 2 s 1 p 1 to
16 row - 1 r 1 z 1 f 1 z 1 r
17 row - 1 p 1 z 2 f 1 z 1 p
We gave everything repeating from 6 to 17 rows, then we will repeat from 6 to 17, and so 14 rhombuses (parts) are needed.
You can, obviously, and more, ale ce already at your discretion.
At the gate.
1 rhombus - with one chervonim module in the middle of the rhombus (replacement 4 chervonim);
1 rhombus - without red modules in the middle.
Tail:
in a row, when the yellow rhombus ends, we can change if the green modules are 6-5-4-3-2-3-2-2-2-1-1-1-1-1
The tail is shorter than pіdkleіti.
Now it is necessary to carefully bend the snake's body. Tse nayvіdpovidalnіsha robot, akuratnіshe, zіya mozhe rozsipatisya, as you did not win the glue.
The snake is ready!
Meister class was held by Ganna Maksimenko
And right now I'll show you how to make a snake from origami modules with your own hands, the scheme is even simpler and better for anyone, if anything, creating similar patterns. Basically, the color of the din of the snake is not too different, it will be green and the same color. The snake fights like a wild smoky from the modules and in some parts it expands and sounds.
In your own case, you will need PVA glue, so you need a little bit of dripping on the modules, so that the snake does not fall apart. Ale, it is necessary to mold the vigin in the robe clearly, until the glue catches the additions. And as you create the snake from the great modules, the snake itself is simply majestic. Like a snake from the origami modules can be bestowed on friends on the holy day.
How about the creation of a modular virobi. Two modules are turned backwards and one is inserted into them, as shown in the photo.
And now we are starting to increase the number of modules in a row and, in general, the number of kutivs. There is one module at the center and two along the edges, moreover, the empty gut is to blame for the middle.
We expand the range up to six modules and replace the inserts with new parts. Zhovty little baby will be all over the body of the snake of roztasovaniya.
The axis is such a little one from the Zhovtih modules, in all likelihood, it will draw five and six modules in a row.
The little one from the yellow modules will be rhomboid. For the knurled scheme, we continue to build up the body of the snake. Don't forget to drip glue.
We continue to build up the modular snake, but we still create vigins. Spread the vigin on the back, and then fix the modules with glue.
Repeatedly robimo vigin.
The width of the snake is such that it stands on its own, without supports. Vagini robimo de more, and de and less.
If the snake comes out too early, we start to work the hood of the snake and give its head. Increase the number of modules in the line.
On the hood, it is important to keep the little ones alive. In the largest row, you can have sixteen modules.
If the little ones were practically grown, the modules in a row need to be changed. On the extreme module at the extreme left of the intestine, one tuft is pressed, and in the right of the intestine there are two steps.
Obov'yazkovo the shape of the hood needs to be worked to the eye. Vіn trohi vygnuty і z zapadinoyu.
After the hood, the row may again lose six modules.
Increase the number of modules up to eight, then we will work together, then we will start again, but we will rise again and again, and after that we will go to the sound again, we will reach four modules in a row. On the head of a yellow baby is also present, a rhombus.
The axis looks like a snake in all its beauty.
So try to create, otherwise. Create similar wondrous works and develop your imagination.