Modular origami kvіti folding scheme for pochatkіvtsіv. Modular origami suites
Store from a modular origami kvіti naytsіkavіshe occupancy. Such activities are suitable for the initial process, and for home creativity. Origami in the 21st century is becoming more and more popular with the whole world.
This kind of creativity brings the team closer to the same, the shards of the skin allow the growth of their contribution to the creation of the beautiful.
Origami - Spills near the vase
Pershі її vіsniki - sprouts are let loose. Propose not to tear these miracles, but to master them yourself.
Quotations and їх technics of selection
The technique of choosing such colors is brought up to a modular origami. The skin ticket is made up of three of the same modules. The stench of a white office paper or square stickers is spit out. Also, for the preparation of a ticket, you need a thin, soft drіt and green corrugated paper.
- Take three square sheets of paper with a side of 4 cm and store the “Shamrock” modules from them. As you fold this module up, it’s better to work out more on the arcus paper of a larger size.
- Apply glue to a small patch of one module.
- Insert the yogo into the gut under the right pellet of the other module.
- So just add the third module.
- Close the modules in the ring by gluing the last tab at the gut from the other side. Between modules there can be a small opening.
6. Take the call of the bride-to-be 23 cm and her husband corrugated paper 1 cm wide. Stepping 1 cm from the edge of the darts, wind a small roll of paper.
7. To bend the sound of the call, as shown in the photo.
8. Rewind papyr over the folded tip.
Keep winding the paprias until the whole taganina is covered.
9. Insert a dart with a thin tip at the ticket and pass it through it, securing the ticket on the sweat. At the base of the ticket, wind one more shackle of green paper with a size of 0.5 x 15 cm. Glue a small leaf, growing from the widow with a size of 1 x 6 cm, and bend the stem.
10. Check out the leaves. Schob stench were zhorstkishimi and trimmed the shape. It is better to fold corrugated papers into doubles and glue them together.
11. Collect more tickets and pick up a bouquet. It’s better to fasten it with an elastic band, and then tie it with a stitch, or put it near a vase.
Vase and technique її folding
For vase you need white, yellow and green tricot modules.
- Prepare 20 two modules of the first row and 20 yellow ones of the other. Move them, as shown in the photo.
- If there are 4 modules in the first and the other row, start choosing the third row. Through the skin 4 yellow modules, pull on 1 white short side of the name.
3. Selecting the third row, close the lanyard of the modules at the ring.
4. Turn the ring in such a way that the new modules turn their names. The back of the ring can not be formed. Trim yoga with your hands, picking up the fourth row. Repair the fourth row from the fixation on the white module 2 with the other sides of the name (DSN). Then insert 3 short sides of the name (ksn). Then repeat the sequence.
5 The fifth row is repaired from fixing on 2 white modules, green and white modules (DSN). Dali insert 2 zhovt (ksn). Repeat the sequence.
7. For the next row, repeat the sequence: white, green, yellow, green, white modules (DSN).
8. At the eighth row, repeat the sequence: 2 green, 3 white modules (dsn).
9. At the ninth row, repeat the sequence: 1 greenery, 4 white modules (DSN). Veishla lower part of the vazi. Give it a rounded shape.
10. Build 7 green modules by inserting two folds of one row into two intestines of the other. Useful to collect 4 green harvests and 4 white ones.
11. Fit the prepared stovpchiki on the lower part of the vase with the short sides of the named modules. Pull the green bars on the green modules of the ninth row, and between the two middle white modules.
12. To build an archway between the pillars. Load 5 modules, as shown in the photo. The arches can be taken okremo, and then we can put them on or build them step by step, walking in the direction of the green and white pillars from the two sides.
13. Must build 8 arches. There are 40 two modules on the chain.
14. Complete the vase with 32 green modules. Put them on 2 pieces, then 1.
Origami kviti (slips near the vase) are ready.
Origami – Vase with fuchsias
Such a modular bouquet in a vase can keep you quiet for a long time with its beauty.
Quotes: instructions for step-by-step folding
Quantities of fuchsia follow this very principle, that there are splashes.
- Vikoite 3 rozhevі modules "Trefoil". Get them at the ticket, like at the vikonann's ticket.
- Characteristic fuchsia - dovgі uterus and ticinki. Watch out for їх. Take a thin lamb tyaganin (11 - 13 cm). Wrap її smuzhkoy erysipelas corrugated paper and fold the kinchik. Approximately in the middle of the part, glue the paper rolls.
- Put a ticket on the bottom. In the basis of the ticket, wind the wife of green paper.
- Hit 5 such tickets on a thin dart. From the green paper, you can see the leaves on small legs. Folding zrobіt on them streaks.
5. Take a tovstu tovstu and wind up to it a letter and a leaf of a male paper. The stems of fuchsia are rosy, light brown, light green. Sound the stench vіdrіznyayutsya for the color of the leaves.
6. Fuchsia can be two-coloured. In order to create such a ticket, use not one, but two blanks from the Shamrock modules, different for the color. When picking up tickets, put them on one by one.
7. You can work fuchsia with a “terry bed”. Cut out 2-3 stakes from corrugated paper and grind at the center of the opening. Put a stake on the call with glued marks, emboss it around it and glue it. Let's put on a ticket.
Vase: instructions for choosing
For a vase, prepare blue, white and erysipelas modules. Zabarvlennya vasi to lie down depending on how much money is worth in it.
- Prepare 54 modules (18 x 3) for the first three rows. Choose the first and the other row, placing the modules with long sides uphill. At the third row, stitch the modules with the short sides uphill.
2. Close the lanyard from three rows at the ring.
3. Turn the ring over and continue to put on the modules, calling them the other sides. Wrap three rows of 18 modules.
4. In the next row, there are more than one module per 6, putting on a pair of folds not one, but two modules.
5. In rows from the eighth to the fifteenth, add 24 modules each. Put on a vase a colorful visor from modules to your liking.
6. At the sixteenth row, close 24 modules with short sides of the name (ksn). Veishla lower part of the vazi. Give it a rounded shape.
7. Assemble 6 modules by inserting two folds of one into the other two intestines. Usogo zrobіt 12 such blanks.
8. Push the cut-out workpieces-stovpchiki on the lower part of the vase with the short sides of the name modules. Leave the mіzh stovpchikami in a couple of kutochkіv.
9. Pull on the skin stump by 2 modules (ksn).
10. At the end, knit three rows of 24 modules (ksn), drawing colors.
Origami z paperu (Vase with fuchsias) ready.
Video modular origami with paper (Vase)
At the video evidence, the butt of folding and the technique of folding modules. Understand the selection from the video - you can select the vase from the stats.
Modular origami: How to create a ticket for commencing (video)
The butt of folding a ticket from the modules of the video is wise and simple. You can do more and better, so that your knowledge grows. Good luck to you!
The preparation of figures from different color modules will make it possible for you to become of great interest to members of the family. To develop a master-pochatkіvets, having mastered the basics of origami, you can dazzle with exclusive virobs.
Origami is a similar art of creating decorative figures with paper, as if including a sprat of views. Modular origami - yoga warehouse part.
See origami:
name | Description |
Modular |
|
Just |
|
Wet folding |
|
By pattern |
|
Module for origami no less than 10 views. Flat vicorist for making mosaics, from bulky details form kuli and figures. Expanded modules in the form of trefoil, tricutnik. Harvest in the form of pyramid vicorist for the creation of kusudіv - yaskravih bag.
Materials for robots
Paper for modular origami should be chosen as a matt paper, not glossy, so that it can be easily forged. Farba in the misery of death is not guilty of being erased.
- office bila and kolorova, dosit mіtsna and shorts;
- stickers, blocks for records;
- kami - Japanese paper for origami;
- magazine matte;
- obgortkova;
- podarunkova (packing);
- foil.
Colored school papier is not suitable for work, thin wines and white on the folds. Modules made of cardboard rotten badly. Newspapers are suitable for pochatkivtsiv, the stench is not mіtsnі and zhovtіyut.
Preparation for work
Before the cob of the cob, the modular figures are stocked with paper of the necessary colors and the modules are prepared. Three-curve modules are folded from straight-cut sheets from sp_v_dnoshnennyh storіn 3:2.
Preparation:
- Arkush A4 is folded navpil, then 3 more times. There were 32 rectangles on the paper. From them, choose modules of the most popular size 1/32. As necessary details of a larger size, fill in 8 or 16 parts.
- Cut papier on rectangles with scissors or stationery knife.
- Fold the part long, then wide. There was a control line in the middle.
- The sides of the rectangle are turned up to the middle, like when picking up the litak and turning the workpiece into another bik.
- The extreme kuti of the parts protruding from the bottom bend uphill, vshchent trikutnik.
- Lift the lower part of the workpiece. Viyshov trikutnik.
- Knit a tricot on the middle line. The module is ready.
There are 2 kuti in front of the part, and 2 intestines in the back. Three auxiliary modules are connected to each other.
Module selection technique
The module for the folded look is a straight tricoutnik. The hypotenuse is called the long side, the leg without guts is called the short side.
The configuration of the deposit to be deposited according to the method of loading the modules:
- The kuti of one tricoutnik is inserted into the gut until the intestines. So, from dekіlkoh details come out flat swag, like vicorist for the preparation of tails, necks, and figures.
- The top of one tricoutnik is inserted at the gut of the other, then the top of the other is inserted at the gut of the third. Z'ednannya to serve until the creation of the old lances, the foundations of the articles.
- Schob z'єdnati 3 modules, susіdnі tops of two parts are inserted at the gut of the third.
- There are rows of stringing knitwear on the bottom row of details of the bottom row. As a fallow, the module is loaded onto 1, 2 or 3 vertices.
The way with the other side uphill means that the module is pulled forward with the hypotenuse forward to the selector. The short side forward means that the tricoutnik is strung with a leg in front. The most common method of folding rows is uphill on the other side.
Quote from paper
Modular origami for pochatkivtsiv master, creating simple figures. Koristuyuchis tsієyu tekhnіkoy, you can make a ticket or come up with an image of growing. Such products are made from modules with a size of 1/32, so that the figure looked thinner and closer to the original.
They embellish the holy stele, bestow on the 8th of Bereznya the day of the people. Great modules vicory for the preparation of great colors, with which they embellish the premises to the tracts.
Lotus or water lily
The lotus, which wins at the technique of modular origami, is made up of 6 green leaves, on which a two-coloured bud is placed from the heart. For robots, 240 erysipelas, 126 dark erysipelas, 50 yellows and 318 green tricots are prepared.
Modular origami for pochatkivtsiv: Pokrokove cooking lotus
Order dіy:
- Start from the preparation of leaves in the shape of a rhombus. For the first greens, insert 2 elements into the module, add 1 tricot in each row. After smuga from 7 tricots in the skin stepping row, the quantity is changed by 1. To add two leaves of vicorist, 4 additional modules are inserted back side. All 6 blanks are scraped together.
- Similarly, from erysipelas tricutniks, 6 petals are prepared for a bud, which finds a row of blanks, it is composed of 5 modules.
- Ready parts are laid out in a row and the pellets are closed with the first dark erysipelas module in the middle. We will then fill the gap with space and flash the two-coloured smuga in the ring. 3 rows are laid along the bottom of the card, black and white tricots.
- Three of the elements are folded into the core, 5-6 pieces in a row. The bud is placed on the leaf and inserted into the middle of the new one.
The bud can be scribbled or monotonous, along the edge of the leaf lay rows of dark or light modules. Like a flower, tidy up the core, the lotus will transform into a vase.
Lilia
Strokaty royal ticket wiyde z 230 orange and 50 brown blanks. The lily is made up of 5 pelyustok, in the middle of the ticket, insert additional papers from paper and other materials. The stem is formed from 3 cocktail tubes.
Modular origami for pochatkivtsiv: Pokrokove preparation of lily
Order dіy:
- All modules of the pellets are inserted in the gut with the other side. The first 3 rows are made of orange modules, step by step adding 2, 3 and 4 details.
- At the 4th row, add a brown element - 1 orange, 1 brown, 1 orange tricots. Along the edges, fill with one roll of modules of the front row.
- The 5th row is made up of 4 orange modules, 2 extreme details are straining, groaning in the 3rd row, so that the side of the pellet looks smooth.
- The 6th row is selected from 5 modules: orange, brown, orange, brown, orange. Row 7 is selected from 6 orange parts.
- In the 8th row, draw 4 orange and 3 brown modules, start and finish the row with yellow elements.
- The 9th row is made up of 6 orange tricots, for a change in these rows, the extreme modules are put on 3 upper parts of the 8th row.
- In the 10th row, 3 orange and 2 brown details are placed in the check order.
- Row 11 is formed from 4 orange modules, row 12 - orange, brown, orange elements. Finish the pellyust in rows of 2 and 1 modules.
- Ready pelyustki vyginayut, schob nadіbnіst to live ї ї ї ї ї ї ї і є єєdnuyut bіlya podіla і brown details. At the chick, insert the thread and pass it through the middle of the lily.
- For the stem, 3 tubes are fastened with a dart from the larvae of the flower and pasted over with corrugated paper. Leaves are placed on the bottom.
The lower lily of the viide from the bilih and erysipelas modules. Original looking card with details of contrasting colors.
Narcissus
For the preparation of narcissus, 16 two modules are needed, and a double-sided yellow paper jacket with a width of 2.5 cm for the core. Like a stalk of vicorist tube for a cocktail.
Modular Origami for Pochatkivtsiv: Pokrokove preparation of Narcissus
Order dіy:
- Lay 8 modules on the stake, with the short side to the middle, and attach 8 trikutniks to them. For this cut of two essential parts of the 1st row, each stake is inserted into the intestines of one module of the outer lance. Veyshlo nobleman kіltse, tseplyustki.
- One beak of yellow paper smudge fringed, swollen with a tube and lightly glued. Ready to insert the middle at the head of the narcissus.
- The cocktail straw is wrapped with a smog of green corrugated paper and glued, 1 cm does not reach the edge of the tube.
- Vilniy end of the tube is cut into 5 parts, smeared with glue and inserted into the ticket.
- The smuzhka from the corrugated paper is glued together, allowed to dry, and a long leaf is glued, which is glued to the stem.
Z kіlkoh narcissіv wyde spring bouquet for mom, grandmother and sister.
Troyanda
A Trojan can be smashed out of 95 modules and a cocktail straw. You can take tubes of juice, then you need to insert them one into one, to keep them alive.
Order dіy:
- The bud is picked up by the beast down to the bottom, step by step sounding the figure. 1, 2 and 3 rows are made up of 15 tricots. Elements 2 rows are pulled up with the long side of the hill, and 3 rows - with the short side of the hill. Form a three-row ring, the top of the ticket.
- The 4th row is continued along the stake, the knitters are pulled on 3 kuti modules of the front row. 5th, 6th, 7th rows are stacked with 10 elements, connected with the front row in the most significant way - 1 module for 2 suicidal cycles.
- At the bottom of the card, 10 modules are inserted, like pellets. For reliability, they are glued.
The straw is covered with swarthy paper in a spiral, glued. The mountain stems are molded with a sweat paper, which is closer to the diameter of the opening in the trojan. They come out of paper leaves, stick them on the stem. Lubricate the top of the stem with glue, insert at the bud, press for a few seconds.
Bila troyanda
There was a ticket for 110 modules with a size of 1/32. Papir pіdіyde zvichayny office.
Order dіy:
- Choose a ring from three rows of 18 leather modules. In the 1st and 3rd rows їx, knit the short side forward. Details 2 rows - uphill on the long side.
- In the 4th row of leather, the element is pulled onto the 3 tails of the details of the bottom row. Then we take 2 rows of 12 pieces and 1 row of 12 tricots, short ahead.
- In the rest of the row, 8 tricots are placed with the name of the short side, inserting them into 3 kuti of the front swag.
The bud is ready, the tube for the cocktail is wrapped in swag paper, glued to the virizane of the leaves. Trojan is put on the stem, smeared with glue.
swan
Modular origami for pochatkіvtsіv zatsіkavit people, how you want to create volume figures birds and creatures. For the preparation of a swan, 458 two modules and 1 red, for a dziob are needed. Great figurine vyyde іz trikutnіv size 1/16. To make the tops of the parts smear with glue.
Order dіy:
- Folding is started from a bird's coat. In the 1st row, 30 tricots are stitched with the long side of the name, they are put on 30 modules of 2 and 3 rows with the short side of the name. Kuti of 2 susіdnіkh modules enter to the intestines of one trikutnik of the offensive row. Smugu zamikayut at the ring and similarly lay 4th and 5th rows. The figure is twisted, the harvesting comes out at the shape of the bowl. Add 6 rows of 30 pieces.
- Krill are formed from the 7th row. To fill in with 2 tops of suede tricots - ce place for shii. Lіvoruch and pravoruch vіd promіzhku put on 12 modules. Behind, there is a free carriage for the tail. To select wings, change the number of details by 1 for the dermal shoulder blade. The rest of the row is made up of 1 module. Creela viginayut to create the effect of a bird that zlіtaє.
- The tail is spun similarly to krill, changing the number of modules in rows up to 1 tricot.
- Shea is folded from 31 blanks, they are taken from joba, inserting the kuti of one module into the gut of the other. Sob dziob without looking at the underwire, yogo will be glued. At the process of picking, the birds die. The instructions from the swan's dzhobom are glued to the eyes and inserted into the neck between the wings.
As if from a golden paper, make a crown and a crown, weave the swan princess. A black bird with krills, edged with white swirls and a panicle on the breasts, looks presentable. Children are like different kinds of swans.
Kavun
For the creation of a kavun chasten, 114 red, 66 green, 17 white and 16 black blanks are needed. Їх insert the long side uphill, the cream of the first row - yogo details are stitched uphill with the short side.
Order dіy:
- Start picking 15 green modules. 2, 3, 4 rows are taken from green tricots, 14, 15, 16 pieces each.
- In 5 rows: 2 green, 13 white, 2 green. 1 green tricoutnik roztashovuyut on the cob and on the 6th row, insert them 1 white each, the middle of the lancet is made up of 12 red modules. 7 row start and finish with 1 white element, in the middle 13 black parts.
- The 8th row is made up of 14 modules, red ones are drawn from black ones. Row 9 is formed from red 13, the next rows are changed by 1 module.
- In 10 and 12 rows, red and black details are placed sequentially, behind the visor. Row 11 and z 13 to 21 are taken from the red modules. The rest of the 21st row is made up of one tricot.
Zaєts
To raise a hare by the light, 402 two and 120 different-colored modules are burned. For a figure without clothes, take 520 parts of one color.
Order dіy:
- For the first 3 rows, take 24 parts each, form a three-row smuga and flash at the ring. To turn around, to go out preparing at the sight of a wide judge.
- From 24 colored parts, take 4th row - an ear of light. Insert them not to the end, but close them more and push the lower kut forward for obligation. Similarly, 4 more smugs are laid.
- For the 1st row of the head, take 24 tricots and pull them with the short side forward. In another row, add 6 parts. In this and the next 6 rows, the details are strung on the long side of the mountain.
- Wuho begins to be chosen from 6 trikutniks. Їx zadnutyut with the rest next to the head with a short forward. 2nd row is made up of 5, 3 - from 6 parts. The remaining tricots are strung on the remaining tops of the 2 lower modules. So take 7 rows. Row 8 is made up of 5 tricots, extreme details are stitched on 3 tops of the 7th row. Row 9 - 4 tricots, 2 middle ones are placed more than 2 extreme ones. Skip 2 head modules and take one more head.
Virіzayut and glue the hare eyes and nіs, comir and blizzard. From the cardboard, hands are wielded, and they come to the toe-bag from the sides. Like a swarthy paper, cut it with a fringe, twist it on an olive and glue it, wid a chubok.
Penguin
Modular origami for pochatkivtsiv allows you to deal with this technology early century. For example, take the penguin's brother for the strength of a child. To choose a bird, take 129 black, 1 orange and 76 white modules.
Sequence dіy:
- Row 1 is selected from 10 black and 6 white parts, installed uphill with the short side. In the 2nd row - 7 white ones and 10 black ones, they are placed on the other side of the mountain.
- In the 3rd row, 6 white and 10 black blanks are pulled up with a long base. Three rows of swirls are brewed in a ring, and they form a bowl.
- In the 4th row - 9 black and 7 white, in the 5th row - 10 black and 6 white, in the 6th row - 7 white and 9 black knits. Row 7 - 10 black and 6 white elements.
- 8 row - the cob of the head, 9 black and 7 white parts. 9 rows have 10 black and 6 white parts. In 10 rows - 9 black and 7 white blanks.
- 11th row - 10 black and 6 white ones, the approaching smuga is similar to the 10th row. In the 13th row, there are 11 black modules. The top of the figure is squeezed.
The orange module-dzhob is inserted at the center of the head, from the sides there are black tricots - krill. They see and glue the eyes of the penguin.
Owl
A small two-coloured owl is selected from 62 white, 7 orange, 157 black and 2 black modules.
Order dіy:
- Row 1 - 13 black and 5 white knits with the short side forward. Bіlі blanks are placed between blakitnimi, the whole cob of breasts. Row 2 is formed with 6 doubles and 12 tricots in a short forward and zamikayut ring.
- In the 3rd row, there are 5 white and 13 black details with a short base forward.
- In 4th, 5th, 6th rows, the details should be used as the basis for the mountain. Row 4 - 6 white and 12 black knits, 5 row - 5 white and 13 black knits, 6 row - 6 white and 12 black knits.
- Row 7 is laid with 5 white and 13 black details with a short base forward.
- In the 8th row, 2 central white modules are placed with the short side forward, 4 white ones and 12 black ones - with the old base forward.
- At the 9th row, in the center of the white board, insert an orange tricot-dzyob, right-handed and left-handed in the middle of 2 white and 13 black details.
- In the 10th row in the middle there are 2 white tricots, on the sides of them insert 1 white and 1 black element, followed by 12 black tricots. At 10 that advancing ranks, trikutniks pull forward on the other side.
- In the 11th row, 1 black element is placed above the work. On the offending sides of the new one, 2 more modules are laid. Finish low with 13 black tricots in the back.
- The 12th row is made up of 8 black elements, stitched in the center of the figure. In order to add a breath, 3 black details hang from the sides on the whole row. Then we put them on 1 black tricoutnik.
From the bottom of the bird, insert 2 paws, which add up to 3 orange tricots. 2 black details are added to the back - tail. Creels are taken from 3 modules and attached to the sides of the owl.
Zhuravel
For the preparation of a white bird with black pir'yam and black shiєyu, 118 white, 84 black and 9 red modules are needed. Details are glued together for the purpose.
Order dіy:
- Folding is built from the foundations of shi. 2 more details are inserted sequentially, cut in the gut. Row 2 is made up of 2 modules, row 3 - 1 tricot.
- Lіvoruch i pravoruch vіd osnovi form krill, 3 rows of 10 modules. Tulub zapovnyayut, drawing 1 and 2 details. The rows of the tail part are made up of 4, 3, 2 and 1 tricots. To trim the plumage, lay 2 rows along the wings, and 8 black elements with the tail. The edges of the krill are decorated with three rows of three black parts.
- The tail is folded from black tricots according to the scheme 3, 2, 4 and knitted from the bird's tulub.
- Shia is made up of 11 black parts, inserted one into one. At the end, there is a white module, roared into the next bik - the whole head. Add a red trikutnik - dziob. Attach the neck to the crane at the appointed mist.
- Legs are selected from 3 black, 5 white and 4 red modules. For durability, the lower red part is pulled on the other side.
The crane is glued and the eyes are painted. Embellish the figure with a bow and a cape.
Piven
Virib pіven is prepared from 11 yellow, 34 red, 185 orange, 66 green modules with a size of 1/32 and 4 red ones with a size of 1/64. Sob to post did not break up, the place of z'ednannya blanks is glued.
Order dіy:
- Z'ednuyut 3 rows of 11 orange parts, roll at the ring and lay another 7 rows. For shaping the breasts, add a row of 6 tricots, then follow the pattern 5-4-5-4-3-4-3-2-3-2-3-2-3-2-1-2-1. Shia is squeezed and squeezed.
- For krill, select green modules in rows of 3-4-3-2-1-2-1 pieces. Legs roil from 3 zhovtih details, lowering the kuti in the swarm of the foot trikutnik. Add 2 modules each, so they put both tops in 1 gut of the remaining module. Legs are inserted from the bottom of the toelub.
- The head is formed from three orange modules, following them sequentially, combs - from three red ones. They put a comb on the head and put on a yellow module-dzhob, which removes the details at once. From the bottom, add a red tricutnik-beard. Throw your head out of the bird's tail.
Robbing 5 colored tail pir'ins, 17 leather modules each. The creel is glued to the base of the pivnya, the tail is inserted.
Curcha
In order for the poultry to come out, they prepare 207 zhovtih and 6 red modules. For dziob, 1 red tricot is used, the size of which is smaller for the main details.
Order dіy:
- Choose a ring from 2 rows of 16 modules, add 5 more such rows.
- 8th row is made up of 16 parts, put on the short side forward, so that the top of the head is covered. Lay 4 more rows of 16 pieces, long sides forward.
- The rest row is made up of 10 modules, put on 2 or 3 parts of the bottom row. The top of the head is squeezed to give it roundness.
- Crils are taken from two modules and glued from the sides of the curly, add a tail from 1 tricot.
- The paws are made of three red modules, the tops of one are inserted near the intestines of the other two and attached to the bottom of the coat.
Glue the bird's eyes, insert the dzhob. Narize the paper with a fringe, form a curly patch.
snake
Zmіyu z modules roil zginaєtsya or straight. The head of that tail is taken at the same time, and the preparation of the toulub is made using the technique of forging and number of details. For a straight snake, 237 tricots are needed, for a curved leg, 251 modules.
Order dіy:
- Start picking up from the tail. In the gut of the first tricot, insert 2 modules of both tops and so continue 8 rows, drawing 1 and 2 elements. Bichni cut your tail.
- Row 9 is stacked with 3, row 10 with 2, and row 11 with 3 modules. The straight snake is continued to be picked, drawing in rows of 2 and 3 elements.
- Vigin zmії reach zsuvy rows of modules. In the 12th row, three tricoutniks are pulled to the right so that the last cut of the module is left free. 13th row is made up of 3 parts, dressed without replacement. Step 3 rows are laid with a zigzag, 3 modules in a lanyard. At the 18th row, stitch 3 details straight, the 19th row is taken with a zigzag. The 20th row has 4 modules. Viishov one turn of the toelub.
- Similarly, knit rows from 21 to 25 to the left, choosing 3-4-3-4-4 details in them. Then we will choose the shifted rows from 4 modules. Turn to the right or to the left to slacken from 35 to 38, from 47 to 50 row. Stop turn from 57 to 58 row to pass at the head. In the 57th row - 3 modules, in the 58th - 4 tricots.
- Heads of snakes are taken the same way. Lay 2 lanyards in 4 modules, then follow the scheme 3, 4, 3, 2, 1. The price of the lower part, on it is attached to the double paper language.
- For the upper slit, 5 modules are placed on the lower part with guts uphill, covering the outermost corners of the tricutniks. The slot is taken according to the scheme 5-4-5-4-5-4-3-2.
The head is covered with a tulub. Insert small black modules-glasses.
Leleka
In order to grow a cherish, to sit at the nest, you need 40 black, 222 white and 104 brown modules. Dziob for a bird is seen from a red paper.
Order dіy:
- Choose a lancet from 3 rows, 9 modules each for the skin one and flicker yogo dovkol. Wrap, add 3 more rows.
- Row 7 is made up of 11 elements, їх 4 pull on 1 cut, and 7 - on 2 cuts of the bottom row.
- Rows 8 and 9 are taken from 11 tricots, 10 rows are placed 12 modules.
- On the tulub choose a place for breasts and put on 4 details. From above, lay 3 rows following the scheme 3, 2, 1. Fold the top of the breasts uphill.
- For krill, 16 modules are inserted, one is inserted into the intestine until the other. Row 2 is stacked with 15, row 3 - with 14 modules.
- 4th row of krill is taken from 12 black tricots. 5th row - 6 black, stashed triomas in pairs through the river.
- Insert 4 black modules into the base of the tube - the whole tail.
- Shiyu is selected from 23 two modules and folded. Glue the dzhob and the eyes.
- Roar nest - brown color from 3 rows, 26 modules per skin.
The creels are glued from the sides of the coat, the neck is zed from the breasts. Leleka sit on the nest.
Dog
A two-coloured dog can be selected from 37 two and 98 yellow modules. It’s better to buy plastic ones. Modules z'ednuyut on the other side of the fire.
Order dіy:
- For the base, take a ring from 2 rows, 8 modules each for the skin. In the 3rd row, there are 7 yellow tricots and 1 white for the cob of breasts.
- 4th row - 6 zhovtih and 2 bilih.
- In the 5th row on the breasts, add 2 modules, in total go out 4 more and 5 more yellow. So take 2 more rows.
- At the 8th row, 9 modules are put on the short side of the name. Step 4 rows of the head are taken from 9 trikutniks with the long side uphill, shaping the white muzzle of the dog.
- 13 rows have 4 yellow modules. Їx hover over the muzzle with the short side forward - the entire forehead of the dog.
- Vuho is selected from 2 modules, the top of one part is inserted into the gut in such a way that the workpiece is bent.
- The tail is made up of 3 yellow and 1 white modules, sequentially built. The upper paws are taken from 2 yellow and 1 white tricot.
Paws, vuha and tail are inserted between the modules of the dog's coat. Eyes are glued to the muzzle, but a papery tongue of erysipelas.
Pavic
Modular origami for pochatkivtsiv for the help of a master-class allows you to learn how to make folding figures. Pavich is brought up to such virobivs.
For the creation of the royal bird, modules are prepared: 252 green, 128 purple, 217 blue, 45 white, 1 black, 15 orange. The tail of the model is widely developed and is composed of okremi yaskravyh pir'ya.
Order dіy:
- To pick up a pen, successively add 3 purple modules. Then we push 2 blue and їx extreme tops to add 2 more blue tricots. An orange module is glued between them, folded at a glance.
- From 9 green modules they take the arch, de 2 lances from 4 trikutniks into the beast from the module. The sides of the pen appear jagged.
- The arch is made from the preparation of a pen, attaching it to two inner folds of blue modules. There was a pen on a short nizhtsі, їх to sing 7 pieces.
- Similarly, a double feather is prepared, only a small one, and an arch is made up of 11 modules. You need 8 such blanks.
- For a sheepskin coat, take 3 rows of 15 double tricots and knit at the ring, twist. Add 8 rows, 15 blue tricots each for the skin.
- Designate a place for the paws and insert 2 green details. From the bottom along the back, wind the third blue row and fasten 10 green modules at the new one - the mass of the tail.
- From three green tricots to shatter the hull blank, inserting the tops of one into the swarms of 2 tricots. Take 9 such parts and place them on 10 base modules for the tail. A row of 17 violet modules is laid on top with the short side up to the toelub.
- 11 green modules are attached to the bottom under the cim with a vial, and 10 green billets are put on them, like on the front stage. A row of 19 green tricots is taken from above. At the bottom of the back there were 2 blowers.
- Designate a place for the width and put on 3 blue modules in the first row and 4 in the other. The next rows are in the pattern 3-4-3-2-3-2-3-2-1.
- From 7 blue tricots they take the neck, lowering the kuti of the stepping element to the gut of the front. To add a head - a black module that ties a neck with a toulub.
- A short feather is fixed on the first part of the tail, along the purple row. Dovge pіr'ya rozm_shchuyat on the back winder. 2 purple modules are inserted at the head - tse forelock.
Wipe and glue pavich eyes. A crown is put on a forelock with paper.
gut
In order to grow a gut, to sit, it is necessary 386 modules, no matter what color. All the details of the figure are chosen okremo and zadnuyat for example robots.
Order dіy:
- To represent the tunic, take a three-row lanyard with 19 modules in a row and put it in the colo, twist.
- Add 2 similar rows, insert the elements on the other side of the name. Rows from 6 to 10 are made up of 16 tricots, rows from 11 to 13 have 13 modules.
- The base of the head is made up of 3 rows of 16 tricots, connected at the ring. I will prepare and lay 3 more rows of 16 modules, then 3 rows of 13 elements. Glue the head to the toe.
- Start folding the paws from the bottom with 3 parts and continue following the scheme 2, 1, 2, 1, 2.1. Rob 2 paws and glue to the front of the coat.
- Vuha is taken from 3, 2, 1 trikutnikov. Vіlnі bіchnі kuti are glued in order to get a good shape.
- Tail is made up of 13 modules.
Vuha is glued on the head, the tail is glued with the flat side, so that the veins are seen from behind the bowel of the intestine. Make out the muzzle of the eye, with the nose and the nose. Insert a rozhevu mova.
The Dragon
Modular origami proposes dozens of options for the creation of dragons. Pochatkіvtsіv majstrіv zatsіkavit tekhnіka vygotovlennya tsy kazkovy character. Chinese dragon wide with 473 red, 110 yellow and 18 black modules. According to the yoga of the neck, we pass a smuga.
Order dіy:
- The folding of the coat is repaired from 3 red modules, rolled up with the long side uphill. In the 2nd row, 2 yellow tricots are pulled in the center with the short side uphill, and along the edges - 2 red modules, leather on one top.
- In the 3rd row - 3 red tricots, 4 are taken in the same way as in the 2nd row, then go smuga from 3 pieces. So draw rows from 6 to 110, go out in 55 three-module and four-module rows. The body of the dragon is resurrected.
- The paw is folded from the feet and the upper part. The top is molded according to the scheme 2, 3, 2, 1
- In the first 6 rows, the feet in the lancets change 2 and 3 details. In the 7th row - 3 modules, in 8 they are put on by a black tricot. Select 4 upper and 4 lower parts.
- 1 row of the head is made up of 4 pieces, 5 trikutniks are put on them. Let's draw rows after the scheme 4, 3, 4,5,4. Row 8 is made up of 3 modules, stashed in the middle with the short side forward, and 2 black ones, which are placed on both sides on one kut, uphill on the long side.
- In the 9th row, there are 4 details in the middle, with the short side forward, the other 2 black at the edges. 3 central modules of the 10th row are inserted uphill with the other side. On the 1st and 3rd elements of the 10th row, horns are formed, which are formed from 1, 1 and 2 tricots. You will complete 4 modules, selected one by one.
- The lower part of the head is taken according to the scheme 2-3-4-3-2-3. There are 4 small white modules - teeth.
- The cob of the tail is folded from 6 successive insertions of tricots, from the 7th row it is expanded, drawing 1 and 2 modules. From 15 to 22, a row of tails is taken with two-module and three-module lances. Yogo kinets is embellished with black elements, gluing them to look like yalinka. Attach the tail to the coat.
- Bring back the parts of the head, insert the teeth at the crack to the beast and below, glue the eyes. Take 4 legs.
Glue the head of that paw to the toe. There are 10 black modules on the back, the same dragon hairpins.
Rayduzhna vase
Differently colored smugs of the rainbow vase are stashed vertically and sound white at the top. The effect of the transition of color from one to the next is created by the use of modules. For viroba, 320 tricots of red, orange, yellow, green, black, purple colors are prepared.
Order dіy:
- In the 1st row, there are 12 modules - 2 red, 2 orange, 3 yellow and far, yak on oars. In the 2nd row, the tricots replace the right hand, clapping the lower tops of the other color. Robbing a total of 3 rows, making a harvest from 6 colors. Select 6 such structures and flash them at the ring - the basis of the vase.
- Lay out a small 11 rows, shifting the skin of a pair of modules 1 cut to the right. Virib nabuvaє form a rounded judge, yoga walls carefully correct.
- The neck of the vazi is shaped from the 12th row, in which one is laid twice less for tricots. Between the details of one color, insert one module of the same color and make one more row.
- In the advancing ranks, the number of modules does not change, but in the skin lance they are zsuvayut 1 cut to the left. So the vase is taken to the end.
Krim a lot of time spent, busy with modular origami to bring real melancholy. Meister-pochatkіvets can arrange an appointment to the saint, urnomaniac serving the table. And yoga relatives and friends cannot be left without original gift.
Article formatting: Natali Podilska
Video about modular origami
Modular origami for pochatkivtsiv - how to build module 1/32:
Okhoplyuє great number of different topics. From the paper you can make tickets, creatures, cars, life. Vibir is great. Origami z modules "Kvitka" - miraculous addition to any kind of interior space. Such a miraculously looks on the book police, on the podium on the instructions from the room suites or in the "living little hut".
Amazing art of origami
Origami lie down to old creative processes. On the back of the head, it was victorious in various rituals and ceremonies. But later, the art became popular in China, and the posture of the country. Vono was worthy of children and at the same time widely zastosovuєtsya in pre-class occupations and artistic groups. The widest variety of creativity is modular origami. From small leaves of paper, volumes of figures are folded.
If a child is slaughtered by such a process, it will figuratively count on the creation of a position for him. Such art, as it develops the minds of children, fantasy, and helps the development of fine motor skills. After such dodatkovyh master-classes, the memory of that myslennia will be improved in children.
The creation of modules
To prepare the files from the origami modules, it is necessary to prepare the modules themselves. For whom do you need A4 sheets. Їx cut into 16 equal blanks. Then the leaf folds over again, then we fold over again. For the next sheet of paper, turn the fold over to yourself. The edges turn to the center. The lower gates fold up on the hill, and the folds are at the trikutnik. The sheet is unraveling. Tricots are folded according to the lines. Then, in the gates, the hills are again buried. Arkush develops navpil. The result may have a module of correct proportions.
The simplest harvesting
You can shvidko that yakіsno vikonati origami "Kvіti". Tsya scheme is simple. It does not need a lot of time for that material. It includes the creation of a large number of modules, which is good for beginners. For preparation, you need greens, white and yellow paper or cardboard. For the creation of one volume of a ticket, you need 1 arch of paper in a yellow color and 16 arches of white. We store 17 special modules. It is important that such a module had two small intestines and two folds.
For forming a line, it is necessary to form a rhombus. For this preparation process, the sheet is evenly folded diagonally. Lose what you have lost, turn around in the middle. To the main line, which has disappeared along the vertical, the edges of the rhombus are neatly wrapped. The procedure is repeated more times. At the end of the scourge, the line may appear at the middle of the figure. We prepare origami with paper (modules) "Kviti", it is necessary to make a workpiece from six equal edges.
Bouquet of miracle flowers
The lower cuts of the rhombus are neatly folded to the center of the harvest. Then the procedure is repeated with a lot of cuts. Arkush paperu smoothly spreads. It is safe to use the workpiece with curved lines to collect the ticket. Harvesting is done for the designation of lines from the cuts. Potim gostrі kuti zagortayutsya inside. In this rank, the heart of the flower can be taken. For the preparation of origami from modules "Kvitka" the workpiece is laid with the short side to the center.
With this, papyrus 8x8 cm are used for the pellusts. In the middle of the ring, scho wiyshov, the module of the yellow vіdtinku is laid. For decorating the stem, the vicorist is green colorful paper, twisted into a tube. On it you can stick pelusts or plant a bow. In order to take the room from the modules origami like a bouquet, the scheme of creation is repeated by a sprig of times. For example, for a bouquet of 9 colors, 153 modules are needed. Of these, 9 yellow colors and 144 white.
Stem and leaf preparation
Like a stem, you can beat a tube, a straw, or a small stick. The material is pasted over with green paper. The sheet width can be changed by 1 div. Vivoritny Bik smeared with stationery glue and squeezed to the harvest. Then we wrap ourselves in a zigzag on a stick. For the preparation of leafing, you need an arkush paper or cardboard 15x15. Yogo needs to be folded diagonally, and then turned back. The edges of the workpiece must be turned to the middle. Let's fold it to the center on the other side. For the veins of the leaf, the mustache is smoothed. The sheet is turned over, and the edges are wrapped around the olive or the edge of the knife. For the help of this process, garni curls appear.
Simple colorful card
For making origami z knitted modules"Kviti" needs 105 basic modules. For molding the height of the card, it is necessary to induce the first three rows of 15 modules. The leather row is guilty of closing at the equal kilce. Let's sweat it out on the next beak. In this process, it is more important to be careful.
The result may have one side of the modules, the name is reversed. Then 2-4 more rows are prepared in an identical rank. The height of the ticket is left to the discretion of the author. All rows can be robed like one color, and different. If you zastosovuvati raznokolorovі arkushі paperu, then as a result, you can get a seven-quote.
Creation of a volume leaflet
At the heart of the circuit, there are modules, which are inserted one into one, selected from the constructor. Origami z modules "Kvitka" vykonuetsya 10 modules on the skin row. When choosing the first row, 10 modules are placed on a short beak. The stench dies like a cola. Then ten more modules of another row are attached to them. When folding the 3rd row, the modules are installed already on the other side. Then we get the tails of the sus_dn_h modules.
The result can have a scheme for connecting modules in check order. After that the ticket is turned over. Reshta rows are folded in modules on the short side. 4th row is identical to the front. On the 5th row, two modules must be put on the skin module. So for the 5th row you need not 10, but 20. The gut can open in the middle. 6 row - the rest. The wine is foldable from 30 modules. 2 elements are loaded with 3 modules. When folded, the figures of the intestine are guilty, but in the middle of the workpiece. The result can have origami z modules "Kvitka".
Today, the world has a new cicava. The first one of these innovations is the modular origami-kviti. This type of art became popular among the young of the older generation more than a few years later, even after winning one of the first missions.
Kvіti, created for additional modules, appear even more invisible and cіkavim. It is possible to make natural rosemary and zabarvlennya, vicorist for which different paper or fabric. But tulips are the best, lilies near the cat and daisies.
On the Internet, there are impersonal schemes of modular origami-kvitiv, for example, flashes, chrysanthemums and poppies. Let's take a look Pokrokov instructions modular origami kolorіv, zokrema lily at the cat.
For the preparation of a paper cat with lilies, a mother needs:
- Sheets in A4 format erysipelas, blue, green and zhovtih kolorіv. 10 arches of skin color.
- Also, 30 A4 sheets of white color and knives are required.
- To pick up a cat, you need to build erysipelas and blue modules. Get together three horny modules, having formed sixteen such triplets.
- Dalі zagotіvlya zadnuєtsya, і go out two whole rings. The first two rows are ready.
- Thirty-two modules are added to the eighth row for the skin row.
- The ninth row is drawn in two blue and two erysipelas. The sum has -32.
- Tenth row - one blue module on top of two of the same color. It is necessary to repeat the same with erysipelas.
- Eleventh row - two modules of erysipelas color on top of one. The twelfth row has one.
Far away arches are climbing. The skin of the arch can have thirteen modules of the erysipelas color: six from the skin side and one final. It’s less to fight against vіsіm arches. Let's put a row of blue ones on top of the erysipelas modules. Kvіtkovy koshik Mayzhe completions.
If the row is completed, the next step is to prepare the handles. To build a pen, there is a special scheme. The handles have forty-two rows of three modules. If the handle will be re-selected, it will be necessary to bend it a little. You can embellish the paper virib leaves. The layout of the modular origami sheet can be found on the Internet.
Now let's move on to the covering of lilies. At whom all dopomozhe describe the process. To make a lily, a square paper sheet of yellow or white color is needed.
The scheme of folding the colors of the modular origami is awkward:
- The sheet is folded diagonally in tufts uphill.
- Two bіchnі kutochki zadnuyutsya.
- They gave one of the kutochkіv necessary to “open up” and cut in the middle.
- To work with others yourself.
Viyshla figurine with chotirma with tricot edges. All tricoutniks are rozkrivayutsya and razryvnyayutsya.
- Dali the lower left fold, splitting the line, bending to the middle. It is also necessary to fix and correct. The guts are torn apart.
- At the result, in the middle, one more tricoutnik appears, it is necessary to bend it uphill, then turn it over, like a side, so that there are chotirikutniks without a tricoutnik in the middle. Bіchnі kutochki podginayutsya to the middle of both sides.
- Pelusts open up - the lily is ready. It reminds me of cats with lilies, and a flower still life comes out.
Garniy kvіtkovy cat can be presented to friends or put in a prominent place, so that the modular origami could be quieted from the paper.
Such a cat can be called feces. Modular origami-kvitіv kal, their folding scheme or pokrokov's instructions can also be found on the Internet. If you don’t want to go beyond the scheme, take a look at the master class from the certified origamniks. Modular origami, especially especially, - even more beautiful is that hoarsely mysticism, as if it gives peace, that joy embellishes the booths with name-brands of paper.
Yak zrobiti chamomile
Quite from the origami modules you can add other species, for example, daisies.
- Cut a standard sheet of A1 format into sixteen equal parts. Take one sheet and fold yoga navpil. Let's sing it again and open it up with a fold to yourself.
- Dali turn the edges to the center, strictly along the otrimanih lines.
- Turn it over and turn it upside down on the hill. Kіnchiki, which are left out, are dying for taking away trikutnik.
- Let's design and fold the figurines at the sight of the tricots along the marked lines, and bend the gates again. Take off the format to fold it like a trikutnik. From one side of the module, the gut is settled, as if in the distance you need more.
- The construction has two sides - lagidna and dovga. When folded, the daisies-modules are installed on the shortening of the back.
- The first twenty rows of the ticket are selected from the modules of one color.
- Step ten rows of another color of modules are installed on the lower side. Z'ednannya may v_dbuvatisya at the checker's order.
- Stepping rows are installed on the shortenings of the bik. Having turned over the future card, add the modules of the yellow color. A pad (module) is pressed onto the skin by two elements.
For daisies of medium rosemary, about 20 white pelyusts are needed. On the final (shostya) row, one wears not two, but three elements. Vlasne, the chamomile is ready. Like a stem, you can beat a plastic tube under water and glue it with green-colored tape or a colorful paper.
tulips
Garni tulips come out, yakі you can put a vase. For a classic composition, you need over 100 ready-made elements. The modules themselves are prepared according to the specified scheme.
- Three elements creak on the back. The module on the left side will serve as the basis for the first row, and on the right - the other. Dali, at the other and the third row, they are installed according to chotiri elements. Only after that, the selection of the third row begins.
- The next stage is the molding of the height of the tulip bud. For the ring, you need about 15 elements. With this skin, the ring zmikaetsya in the ring, as if potim vivertaetsya neatly navivorit.
At the end, it is necessary to equally or randomly attach the pellets earlier. For clarity, the bud is designed up to the drinking tube.
Water flower latatta
- It is necessary to fold the paper sheet in such a way that it visually subdivides into several parts.
- Then let's fold the mustache to the center. Tse scheme origami-lotus.
- Dali kuti are folded again, and go out onto the envelope.
- Then the model rolls over and folds back to the center.
- At the end, fold all the folds of the square shape.
This ticket is supposed to inspire a maestro-pochatkіvtsu.
Is it necessary?
It has been proven that origami is the art therapy, as it is successfully implemented by doctors of various specializations. For whom all the busyness develops and technical design, architecture, and mathematics.
Occupation origami develops, improves the musculoskeletal system, develops hearing, does not damage the development of fine motor skills and visualizes, especially in children. This is a step-by-step process, which means sitting, concentration of respect. It is necessary to take an hour to pay the vіk "majstra".
Irrespective of those that the technique of modular origami is especially special, you can learn the simplest coristuvach. Varto is less likely to know the correct instructions on the sides of the All-World's Web.
Oleksandr is a permanent expert for the PupsFull portal. Won write articles about games, pregnancy, vihovannya that navchannya, looking after a child and a healthy mother and child.
Tsі kvіti z trikutnyh modules become a miraculous replacement for piece and natural roslin. It is practically not necessary to keep an eye on such a ticket, and it will bloom, and gladden you skin day. Dali report instruction that description.
Photo by Galina Tikhova
For folding we need:
- 75 knitting modules (10 by 6 centimeters);
- 1 green A4 sheet for the stem;
- 3:00 free time.
You can change the number of tricot modules according to the authority's judgment.
For the cob, prepare and collect 75 elements. When picking up a ticket, you can whip up glue (in this rank, the ticket will last longer and you will need to look after it less).
The design is made up of 7 rows, so that they close in the check order:
If you come up with a foresight, and black color, then you can make a smart and stylish combination. Tsya ticket will become a distinguished gift(like all modular origami), as well as an irreplaceable part of the interior, like an element that takes respect on itself.
Scheme for choosing colors from tricot modules
For an addendum to the final design, you can choose, in the same way, place this enchanting ticket. In the same variant, the composition will be as complete as possible.