The form of a child's jacket with a hood. Shimo child's winter jacket
The lining part of the jacket is ready (as we looked at sewing in, you will also know the shape), but it’s still far from the finished fabric: you still have a million details from raincoat fabric, so you can sew, parts from a jacket lining for cuffs and komira, snake ... In my master-class, we rozpovimo, as if competently put all the parts into a single vibr - a spring jacket for a lad.
Preparation:
1. For us, you need to buy more or less large details of the jacket. Apply to the sides of the central part of the back two side parts of the back and, as necessary, creak with hairpins. Be careful: the raincoats may lose their memory after hairpins. Also, if you can, try to do without the overworld piercing of tissue. Sew the sides to the central detail, with a vicorist straight seam with an interval of 3.
2. Seam allowances should be added at the back of the central part and stitched with a straight seam on the front side.
3. Before finishing the details, apply the back yoke (Vich-on-Vich) and sew with a straight seam. Let's make the seam allowance by itself, bending the yogo to the upper part (coquette).
4. On the inside, in the lining, on the sleeves - full, from the main fabric, cut in two parts of the sleeves. Now it is necessary to sew them in pairs on the machines and in a row, spread the seam allowances on the frill.
5. Well, then - add seam allowances on the front side on both sides of the strike seam.
5. The back part of the jacket and the sleeves are ready - now, it is necessary to sew off all the details of the front part. To the central and bіchnі part of the polka, apply burlap (vіch-on-vіch) and creak with hairpins.
6. Stitch the burlap to these details, and then turn the burlap and stitch along the front side, making a small opening into the fabric stitch.
7. Fold at once the central and bichnu details, having put the burlap in the gut, and stitch them along the vortex with a straight seam. Lay the seams only in the mountains (to the intestines) and below (after the intestines).
8. Twist the trimmings of the sackcloth at the side of the front and stitch the seam that goes behind the side of the front from the central part of the front. The axis can be such a neat entry to the gut:
9. Turn the virib on a vivoritny bek and stitch the burlap along its perimeter.
10. On the front side, build up a fastening in the mountains at the bottom of the entrance to the gut. For this, go through a short and sharp zigzag seam perpendicularly to the entrance to the gut.
11. Sew the front yoke to the front stripe with the intestines. Allowances to burn up the mountain (on the back of the coquette) and stitch with a straight seam. All the same to repeat and with another policy: spread the gut and come flirt.
12. Attach the fronts to the detail of the back: stitch the shoulder seams, bend the allowances at the back of the back and stitch.
13. Before the armholes of the sleeves of the jacket, apply the sleeves and fasten them with hairpins (if desired, at the upper shoulder point).
14. Attach jacket sleeves to machines. At sewn tsієї jackets, it is often necessary to add stitches (for additional decorativeness to the robe), but in the case with sleeves, this robe is not necessary.
15. Stitch side seams of the jacket on the machine, to pass at the seams of the sleeves.
16. The base of the jacket is ready! Now you need to wear cuffs. Close the cuff details in the ring and stitch the edges on the sides. Let's wyvern on the front side.
17. "Pull" the cuffs on the edges of the sleeves and fix with pins, stretching the cuffs.
18. Stitch the cuffs and turn the sleeves on the front side.
19. To the lower bar, which is tight, attach two details from the raincoat - the details of the lower bar, as if the order will be stitched from the bottom of the glitter.
20. Open the zipper of the jacket and sew only one edge to the bottom of the jacket.
21. Attach the inner edge of the lining to the lining of the jacket.
22. Fold the front and lining parts of the jacket as shown in the photo: how to put a folded bottom bar between them from the bottom. Sew the line with a seam, as you have attached the bar to the lining. Ale, when you need to repair and finish the seam for 10 cm from the edge of the sides of the jacket (it would be easier to sew on a glitter).
23. Wrap the offending parts of the jacket - the front and the lining - navivorit and carefully apply the lining sleeves to the jacket ones. Sew the bottom edges of the sleeves from the lining to the allowance of the cuffs.
24. Cuffs and bottom strap are sewn on!
25. Roznіmnu zmіyka povnіstі rozbnіt and add її halves to the sides of the jacket. Fix the glitter behind the help of a manual basting seam.
26. Attach glitter to the sides of the jacket, vicorist foot for sewing glitter.
27. Trochs to support the side seam of the lining and wyvern it її navivorit. The detail of the comir, folded in the middle, put between the lining and the main part of the jacket (similar to before, as you sewed the bottom strap of the jacket, which is tight) and stitch with a straight seam. Turn the jacket on the front side, stitch the comir, the trochs have stepped into the fabric stitch. Carefully stitch the gasket in the lining of the opening.
Spring jacket is ready! Її can be sewn in a day or two, having spent small pennies at the same time. The jacket's tongue can be replaced with the usual "2 on 2" ribbon, and even shukati in the stores of the necessary brand's tongue - it's not on the right. Vikoristovuyuchi form tsієї model, you can sew and zovsіm easy windbreaker jacket for spring walks!
A windbreaker for a baby can be handy and comfortable. The model of the vikonan is given with the improvement of all necessary needs for wearing. The hood will protect your child from the plank and the wind. Save guts at the seams with your hand. Under the hour of sewing a jacket, you can combine the main fabric, vikonan in different color variations.
Get the form windbreakers for a little boy without cost for the required expansion, you can follow the coming messages:
Rozmir (zrist) | Bust | Waist | Girth stegon | Vіdpovіdaє vіku | |
rozmir 98 | 54-56 | 51-53 | 55-58 | 3 rocks |
Payment for goods Buy |
rozmir 104 | 55-57 | 52-54 | 57-60 | 4 rocky |
Payment for goods Buy |
size 110 | 56-58 | 53-55 | 59-62 | 5 years |
Payment for goods Buy |
rozmir 116 | 57-59 | 54-56 | 61-64 | 6 years |
Payment for goods Buy |
size 122 | 58-62 | 55-58 | 63-67 | 7 years |
Payment for goods Buy |
rozmir 128 | 61-65 | 57-59 | 66-70 | 8 years |
Payment for goods Buy |
rozmir 134 | 64-68 | 58-61 | 69-73 | 9 years |
Payment for goods Buy |
* As a result of the payment, a file with a twist is automatically added to the e-mail you specified. If the file is not received, it is necessary to verify that you correctly indicated the postal address when paying. It’s not necessary to re-pay for an unrequited variant, it’s enough to turn around for an address [email protected]
**You can request your payment option at the return link site
Patterns are given without seam allowances.
Warehouse for a set of patterns
To win respect: the hood is folded from two side parts and one central one. There are no streaks on the technical side of the wine.
This model may be easier for cold days. Pіdklad, vykonany z fleece or velor, acting like a thin insulator. If you want to twist the shape for sewing a warm jacket with a sintepon, then you need to add additives along the seams and additionally bend the windproof strip of the blisk.
Recommendations for the choice of fabrics: raincoats, waterproof fabrics, jackets, balloon fabrics. As an insulator for the winter version, you can use vicorous synthetic winterizer, and for the lining, you can use fleece or the original fabric of the lining.
Riven folding - above average.
Cut from the main fabric:
. Anterior part - 2 passes;
. back - 1 sub. zі zginom;
. pedboard - 2 children;
. facing the neck of the back - 1 sub. zі zginom;
. the central part of the captur - 1 dit;
. bichna chastina captura - 2 children;
. sleeve - 2 coats;
From the backing tissue:
. gut - 2 dit;
. central ozdoblennya before - 2 dit.
Rozkriy from lining fabric:
. front lining - 2 children;
. lining of the back - 1 lining with a fold;
. lining of the sleeve - 2 coats;
. lining of the central part of the captur - 1 item;
. lining of the bichnoi part of captur - 2 children.
When cutting parts, it is necessary to add seam allowances along the seams - 1.5 cm, on the bottom of the jacket and sleeves - 4 cm.
Stages of work:
1. Fold the piece of the central piece in front with the front side to the front side of the front and vikonati seam. Take a look at the front part.
2. Allowances for guts should be requested on the reverse side and sewn on the front parts along the marked lines with the reverse side on the front side.
3. Behind the bazhannym guts, you can make a decorative tasma or an inlay, in front of sewing it on the detail of the gut, or inserting into the seams the detailed details of those side seams.
4. Fold the details of the fronts and backs with the front sides in the middle and viconaty of the shoulders and side seams. Look at the back.
5. Vikonati sewing sleeves. Behind the bajannyam you can sew the sleeves of the vzdovzh shvіv.
6. Sleeves fit into the armholes, trochs sit down on the eyelet to the required size.
7. At the back, the side parts of the captura, with the central part, having combined the middle with their front sides. Zrіzi rozprasuvati i zrobiti nadsіchki vzdovzh horn seam.
8. You can look at the details of the hood with lining fabric here: https://youtu.be/VSgm24XHad4
9. Kaptur instantly, along the shoulder seams. At the top, we grind the neckline and turn it down to close with a lining.
10. Details from the lining fabric are knitted together, especially the details of the sleeves, as well as from the main fabric, fitting along the okati.
11. A hanger for a jacket can also be worn with a lining or with decorative lacing, fastening it on the front side of the neck of the back part of the lining.
12. Fold the windbreaker with a lining on the front sides and cleanly turn it up below the rose mark for a shine, along the turning of the neck of the back and bottom. Wrap the windshield through the open side at the place where the glare is sharpened.
13. You can correctly fasten the lining with the bottom of the sleeves on this video: https://youtu.be/S072k19W2GM
14. Under the edges of the sides, take the halves of the zipper-blisk so that the teeth are visible.
15. A windbreaker with a vіdstrochit vіdovzh vіdovzh borіv i vіrіzu of the hood, and then along the bottom edge.
16. Behind the bajan, a seam can be laid at a width of 4-5 cm, to draw a fixing cord into the drawstring.
A child's thin jacket with a lining made of fleece will warm up on cold autumn days, and the hood will help to cling to the wind. According to our form, you can sew a jacket like for a boy, so for a girl. Vikroyka is secured for a child of 2 years.
Baby jacket: preparation before sewing and material preparation
For sewing a child's jacket, you need fabric for the upper part (bazhan waterproof), fleece for the lining, knitwear ("gumka") for the cuffs and a pink glitter. Vitrata fabric - two dozhini wiroba plus 10 cm, for allowances. In order to accurately fit with the frilled fabric, take a stretch with a width of 150 cm, fold the doubles. Let's put it on the nіy vykrіyki with urakhuvannymi allowances for seam and kіlkіstyu details. The main details may lie in parallel. Use a centimeter line to put the slips into the fabric. Tse i will be accurate vitrata. If you take the main fabric with a small piece (vіzerunok) in one straight, fold it and do not turn the shape over. Instead of jacket fabric, you can choose another fabric: jeans, velveteen, suede.To inspire us to form, we need paper, or we can use old tapestries, millimeter paper, or A4 format.
Otzhe, let's sew a baby jacket!
Pobudov vikryyki
For the cob, use a straight cutter. For details of the front and back 36x17.5 cm, for sleeves 28x40 cm.
Rozkriy
Seam allowances - 1.5 cm. Pidgin at the bottom of the sleeves - 4 cm. Pidgin at the bottom - 4 cm.
From jacket fabric:
- back detail 1pc;
- front detail 2 pcs;
- sleeves 2pcs;
- hood 2 pcs.
For fleece:
- back detail 1pc;
- front detail 2 pcs;
- sleeves 2pcs;
- hood 2 pcs.
Hid roboti
We sew sleeves from the main fabric with the details of the transferred back. Let the allowances through the cut, sew the stitches.
Stochuєmo one hour white seams of jackets and sleeves
Same work with lining details.
We sew together the details of the hood. Then we sew the hood of the main fabric with the hood of the lining at once.
The hood is sewn to the jacket. You can see the middle of the back on the main fabric. Fold the back seam of the hood from the line in the middle of the back. The front side of the back to the front side of the hood. On top of the front side, we put a lining in the middle. On the details of the front, allowances for glare may be left out.
Sew on cuffs. Fold the cuff navpil, with the vivorit side in the middle. The cuffs are also sewn on like a hood. We turn the sleeves from the main fabric and the lining on the frill. Sew the sleeves together from the main fabric and the lining. Between two sleeves there are cuffs. Slit the cuff to the lower slit of the sleeves, stretching with this cuff.
Let's sew on a glitter. Vіdstupaєmo at the bottom of the front of the jacket 3 cm, robimo mark. In the form of a mark, the halves of the blisk are sewn on, the ends of the blisk are turned.
Today, on the shelves of children's stores, crazy, you can know the cicada and practical speech for a child. Branded and not branded, expensive and cheap. Ale mami, if you want to mother a unique speech, so that such a robe could not be worn on another child. Leave one - sew your own.
You can fold the shape of a child's jacket for a boy or a girl, and then you can sew a brand new thing on your own in one evening. Ale, just for the sake of understanding, that you can have the minimum skills of sewing and can have sewing skills in your arsenal.
Let's look at the shape of a child's jacket in the simplest way, but at the same time you can embellish it at your own discretion. Add some details to make it absolutely unique. It is possible to ask you to ask, de vie gave such a wonderful specimen.
Boy's jacket
The cuts of a child's jacket for a boy or a girl in women from 1 to 3 years are practically not worn, you can focus on other details and choice of fabric. For example, it can be embroidered, appliqué, decorative setting, which is typical for both boys and girls.
For boys, you can win such elements as rockets, ships and motor ships, aircrafts and helicopters, cars. You can win sports items: balls, keys, sewn-in numbers. You can get ready-made chevrons, thermal stickers, stitched embroideries for any sewing business. And if you have a sewing machine with the functions of embroidery, it’s worth asking you the task.
It is also necessary to change the color of fabrics and combinations. For lads, there are such colors: black, blue, red, black, gray, various shades of brown.
Jacket for girls
A jacket for a little beauty can be embellished with images of fairies, blizzards, cats, beads, flowers, bjilok and sonechok, hearts. Miles of creatures will also come - cats, chanterelles, birds, bunnies.
For girls, harmonic colors should be: erysipelas, turquoise, beige. It is possible to win and neutral colors, as if they were like a statue: green, yellow, white.
Rosemary
We stock the shape of a child's jacket for 1 year to 3 years. Ale, children of all ages, before the shitts, it is necessary to take all the worlds from the children:
- volume of waist;
- tight neck;
- sleeve sleeves with zginom at the lіktі and without;
- chest volume;
- volume of bread.
Write down all the dimensions and match them with the dimensions indicated on the form of the child's jacket indicated in the article. It will help you to understand the process of folding.
So, if you need the shape of a child's jacket for a lad for 1 r_k, you can twist the same shape, just change it: add or change, as if you need a long sleeve or a long sleeve, the width of the front and back.
What is needed for sewing
To encourage vikroyka you need:
- millimeter paper or tracing paper;
- olive;
- line;
- centimeter line.
For cutting: knives, creed and dry cute, English hairpins.
For the upcoming virobu:
- vіdrіz denim;
- threads;
- mezhivne cloth is less on the hood;
- 2 gudziki on the gut;
- bliskavka-zastіbka;
- And splendidly, warm mood, even if you sew for your beloved child!
The threads can be like the tone of the fabric, as well as on the contrary, contrasting, they can make a decorative setting on the guts or hoods.
The model is given without a lining, the inner seams are covered with an overlock seam.
Tsya form of a child's jacket for a boy is also a whole pidide, like a trohi її vozmіniti. For example, tidy up the folding on the coquette in front and behind, and straighten the back and fronts. And it’s great to tidy up the hood from the hood, you can replace it with a carded bavovnyanoy fabric, then we’ll see a whole jacket for the lad in us.
And it’s also important to insulate a jacket for cold weather, in which case you need an insulating jacket and lining fabric. Insulation can be stitched on the fabric of the lining, or you can buy everything okay. As an insulator, you can use vikoristany synthetic winterizer, holofiber, thinsulate, or else.
Selected material
You can bring ready-made fabrics at the sewing needles, or pick up the old uncommon rіch: give it, so move it, new life.
The material can be to your taste: fit and denim raincoat, corduroy, fleece, wind oxamite or jersey.
Yak shiti
Let's look at the sequence of sewing on the cuts, on the cut of a child's jacket with a hood for 3 rocks. Krok 1 - form:
- Fold the form on a millimeter or even a different paper - you can draw a tracing paper, a table with the required dimensions.
- Like you will be drawn out, pointed at the photo, for the help of a line, transfer the form to paper.
- I am ready to form the form without allowances.
The following details were included: the front - 2 symmetrical details, the back - 1 detail with a gusset, the hood - 2 symmetrical details, the sleeves - 2 symmetrical details. Bowel - 2 symmetrical parts, bowel valve - 4 pieces (two symmetrical).
Krok 2 - kriy:
- Lay out the fabric on the vivorit side.
- On the fabric, straight ahead of the share thread, lay out the vykryan papers with paper, fasten them on the fabric with hairpins.
- Outline the shape with a cradle.
- From the skin side, it is necessary to add a seam allowance of 1.5 centimeters. Virіzati іz allowances.
Krok 3 - prepare the intestines:
- For the guts of lining fabric.
- We sew a valve, vivertaemo, prasuemo.
- Robimo over the valve decorative setting.
Krok 4 - folding:
- Picking up, tie back with a yoke of a polka.
- Stitch shoulder seams.
- All questions.
- Choose sleeves in the shoulder area.
- Let’s sew the sleeves in the middle (tobto the shoulder seam on one side, and then the shoulder seam on the other side).
- Vіdprasuvati shvi.
- Then sew the sleeve on the other side with one seam.
Krok 5 - preparing captura:
- Sew on the details of the hood: two denim fabrics and two woven fabrics.
- Insert a denim hood into a denim hood, stitch it, twist it to the front side.
- In the middle of the neckline along the back, it is sewn into one half captur.
- In the next bik, we sew on the other half of the captur. It is necessary for the hood to be evenly sewn to the neck.
Krok 6 - bliskavka:
- Vtochuєmo lock - bliskavku to both sides of the polka.
- Obov'yazkovo z_stavlyaєmo edges, shchob was even on the left and right details of the polka.
- Robimo decorative setting.
Krok 7 - pіdginаєmo the lower part of the virobu, please. We sew gudziki on the flaps.
Jacket is ready! Such a form of a child's jacket for a girl of the 3rd year can be folded and sewn to dry.
You can embellish її with additional elements for the ruling court. Just work on your own - just like embroidering a chevron on the gut, then sew it on if you are ready for the gut. If it’s like an appliqué on the sleeves or the backs, then sew on the back or glue the appliqué, and then - farther along the crochet.
So new and original river to embellish the wardrobe of a little fashionista or fashionista. Success!
Spring has come. The time has come to change into light clothes. I sewed a demi-season jacket for my one-of-a-kind daughter myself. Today I'll show you how easy it is to sew that springy child's jacket with your own hands. This is the way to do it for those who didn’t get it, or kermanichok-pochatkivtsiv, 2-3 evenings and the demi-season jacket for your child is ready;)
We need: the main fabric (I took a raincoat, I sewed fabrics 75x105 cm - dont 1.5 times), fabric for the lining (I vicorated the flannel, it’s soft and warm), threads for colors, 4-5 buttons for fastening. I took my hands on the back, I took them out of my blouse, I folded the sleeves on the bottom.
It is transferable to the fabric, vrahovyuchi, which is the upper garment, and it is also necessary on the pidgini 1-1.5 cm, and on the sleeves and the bottom + 4 cm.
We sew the back from the front, then we sew the sleeves at the top. I wanted the jacket to be made with small folds and ruffled the bottom of the fabric with a size of 20x75 cm.
We sew the upper part of the jacket with the lower one, the ribs are not large selections (I had 3).
From the fabric for the lining, we can see the same details, a little less by about 1-1.5 cm and also sewn at once, sewing the lining to the main fabric in the shoulders and sides. Potim pidginaemo bottom and proshiemo.
I saw the troch of the sight of the fastener. I cut 2 coats with a size of 43x8 cm, folded the navpile, tucked the edges and straightened it. Komir is folded from 2 smuzhok (41x5.5 cm), as I sewed at once from one side, also folded the lower part and sewed it with prasko. Then I sewed on some details at the middle of the month.
We will then sew on buttons for another zip on your choice. You can decorate the jacket with a quotation or an appliqué.