How to make a snowman from plastic bags. Snowman with paper (38 ways to grow with your own hands)
You need:
Pair of old white scarves
knives
Gumka
Thread that head or PVA glue
Beads, hairpins with a round handle or gudziki
A small piece of fabric.
1. Pull off the upper part of one of the scarves, starting at five.
2. Twisting the stitches of the scarf (upper part) navivorit and attach up to one of the ends of the gum.
3. Wrap your sock again and fill it with rice. It should be done in such a way that the bottom of the sock is round in shape, and at the upper part there was more rice left over.
4. Close the upper end of the wear with one more rubber band.
4. Now troch is wider in the middle, put on another gum. To build it up in such a way as to make two cools - one great bottom and a small beast.
5. Lost to embellish the snowman:
* Whisk a piece of fabric to give the snowman a scarf.
* Vikoristovuyte beads, hairpins with a round handle or gudziki, sob ochі і nіs.
* A piece of a sock that is left over, vikoristovyte, like a hat for a snowman. To close it, you can twist the thread and head or PVA glue.
* Sew on the middle and large gudzik to the snowman.
* Before the hat, you can sew a small piece of fabric, folded at the shape of a ticket.
Do-it-yourself snowman with cardboard and white thread
You need:
Bila tovsta thread
Plates or compasses
Thick cardboard or polystyrene
Gudziki
Orange cardboard or piece carrot (for preparing the nose of a snowman)
Knives or clerical nizh
Cloth for a scarf
Drit and motuzka
1. For the help of compasses or plates of various diameters, place three circles of different sizes on cardboard or polystyrene.
2. Fold the crossed stake - if you have cardboard, then vikoristovy knives for cutting, and if polystyrene - then stationery bottom.
3. Crumple a rich bag out of cotton wool and put them evenly on the skin of the collar.
4. Now it is necessary to wrap the skin with cotton balls with white thread. For this, we glue one end of the thread to one stake. Rewind the thread around.
Repeat the same with smaller stakes.
5. Bring back the cola. Put one ring often on the other and whisk the glue, so that you can make a large column from the middle one and the middle one from the small ones.
6. Ready to drop that hand of the snowman. For hands, you can wicker, wrap on a skein, or thin needles, attached with glue to the stake.
To make the drops, vikoristovyte drіt or cut the drops from black cardboard and glue it to a small stake.
7. Glue the buzzards to the middle stake. You can also stick horns on the top stake so that the stench plays the role of eyes.
8. From the orange cardboard, cut the carrot and glue it to a small stake. If it is a piece of carrot, then you can simply glue it to the center of a small stake.
Do-it-yourself "Chocolate snowman" making
You need:
white chocolate
Trochs of dark chocolate
Vershkove oil
Container for melted chocolate
Paper for VIP
1. Inflate a small bag.
2. Melt white chocolate in a bowl. It is possible to work like a micro-furnace (read carefully the instructions for a micro-furnace), and on a stove.
3. Spread the bag with topsoil (more than half of it), so that it does not stick to the chocolate.
4. Bury the bag in a bowl with white melted chocolate. If necessary, close the bag of the sprat once, so that it becomes a solid ball.
5. Shvidko swipe the bag and put it on the papyrus for the wine. Let some chocolate drip down - this will be a support for a vase-snіgovik.
6. To deepen your eyes and mouth, you can melt some black chocolate, dip into a new sirnik and put a sprat of flecks on a white chocolate vase.
If you want to add some nis, you can make a small tricoutnik from the skin of an apple or an orange, wrap it in white chocolate and glue it.
* You can also twist the real farby to decorate the snowman and that yogo.
7. The bag can be blown up, and you have a real chocolate vase for zukerok and marshmallows.
Snowmen with light bulbs on a new river
You need:
Bulb
PVA glue
Super glue
Bliskuchi
A small chick in the tree
Fabric farbi, gouache or markers
1. Apply glue to the bulb.
2. Cover the light bulb with glitter. Check while the glue is dry.
* You can find glue with glitters in stores - even if you don’t need a lot of glue, you can apply glitters in a day from a tube.
3. Tie the light bulb with a sling or a lace so that you can hang it on the yalinka.
4. Divide the head into two parts and, for additional superglue, come to the light bulb so that the stench looks like the handles of a snowman.
5. For help farb or markers, paint the snowman's eyes, mouth, eyes and nose.
Why can you build a snowman: plyashkovі krishki
You need:
Ice caps (for one snowman you need 3 caps)
Acrylic farba (bіla, black, orange and red)
Penzlik
Glue-olivets or hot glue
Gudziki
knives
Bliskitki (per bag)
1. Sprinkle with white farboa all the inner part of the skin. It is possible, necessary to apply a sprat of balls. For the bazhannya, you can get some of the best part, but it’s not obov’yazkovo. Check until the farba is dry.
2. Prepare a small piece of tasmi and glue 3 puffed lids to it. Apply a little glue between the lids, so that they creak one by one.
3. On the ends, make a loop and fasten it with glue.
4. Gently paint the eyes, nose, mouth and chin of the snowman with a thin pencil.
5. If the farba is dry, you can add a few bliskitok.
6. To make a scarf, to tie a snowman with a lace, or a thin skein. You can glue a small gudzik to the scarf.
Do-it-yourself new snowmakers from wooden spoons
You need:
wooden spoon
Acrylic farba
Markery
A small piece of fabric (for folding a scarf for a snowman)
1. Pour a wooden spoon with a white farboi. Leave to dry.
2. Paint the little snowman with markers.
3. Tie a scarf from any piece of fabric.
You can put such a snowman near a vase, or tie it to a yalinka, or to a singing gift like embellishment.
Try to grow a sprat of such snowmen with different muzzles.
Do-it-yourself snowman from a jar (master-class)
You need:
Be like a glass jar
PVA glue
Gudziki
Sil chi piece snow
Plasticine or color clay
A small candle on batteries
Thin yorzhiks (white and red) and pompons, as if you want to make earmuffs for your snowman (for a bag).
1. Glue the back to the jar with two gudziks - the eyes of a snowman, then close them from plasticine or clay. For consumption, you can fix it with superglue.
2. Apply PVA glue to the entire surface of the can.
3. Posipte a jar of sill or piece of snow and leave it to dry.
The snowman is ready, but yoga can be embellished. Who has the butt of embellishments with headphones.
Schob robiti headphones:
4. Prepare a red and white thin yorkie and weave them as shown in the image. After that, arch them with an arch so that the ends would stick around the edges of the can, but the lids for the can did not fall.
5. Glue the red pompoms on the ends of the yorzhiks.
6. Put headphones on the snowman.
7. Add a battery-powered candle to the bank and it's ready!
Great snowman do it yourself
You need:
Cola from cardboard, plywood or chipboard
Knife chi saw
PVA glue
Bila acrylic farba
Markery
Sil chi piece snow
Penzlik (if necessary)
1. From the arch to cardboard or plywood, cut three stakes of different diameters.
2. Pour the skin with a white farboa and let it dry. If necessary, cover the circles with another farby ball.
5. For the help of color markers, paint the eyes, mouth, and nose of the snowman.
6. Apply glue to the snowman with a pencil and apply yoga sill or piece snow.
3. Glue the stakes together as shown in the image.
4. Prepare a tape and glue it on the back of a future snowman.
Check while the glue is dry and you can hang the blank on the wall, or put a handrail on the yalink.
Snowman from plastic cups
You need:
Plastic cups
stapler
Color papier or pompon black and red color
Scarf or fabric for a snowman's scarf
Superglue (if needed)
1. Start stacking the cups on the stake, as shown in the picture, stapling them with a stapler. You have a large colo.
* Rob everything on a flat surface.
2. Repair another colo, placing some bottles on top of others and fixing everything with a stapler.
* Choose the size of the future snowman and walk out of it, choose the size of the kіl and continue to put them one on the next one, until you see the pіvsfera.
3. Turn over the pіvsfera and dobte the stake, so that you can take the same sphere - fill in a small opening, so that the snowman can stand more quickly, and also, so that you can place a small lamp in the middle.
4. As you can see, the snowman is crushed from dekilkoh kul, which means that you will need to grow one more sphere of a smaller size - for the head of the snowman.
5. Staple the head with the snowman's coat with a stapler.
6. Wrap a scarf around the mist of two spheres.
7. In order to make the eyes and eyes of the snowman, you can put the zim'yat into the cups in a bag of leaves of black paper or pompon.
* At the center of the bag, as if playing the role of eyes, you can glue small white circles - zinitsi.
* You can also just cut the kilka kil from the paper and glue them to the cups.
* For the nose, you can make a small cone from orange or red paper.
For bajannyam you can put on a snowman a kovpak or a simple hat.
DIY snowman from thread
You need:
PVA glue
Bavovnyanі threads
Colored paper or plastic (igrashkov) glasses
Scotch (for consumption).
1. Inflate three bags of different rosemary - for the coat and head.
2. Prepare a thread and seep it with PVA glue. There are two ways to do this - pour glue into the container and put a thread in it, or pull the thread into the neck, pierce the tube with glue with the neck and stretch it, until the entire thread is leaked by it.
3. Start wrapping the bags with thread. Soak yourself so that there are no great empty spaces on the kults.
4. Fill all the bags in a warm bowl, so that the glue is dry. On tse can drink a day.
5. If the glue is dry, the bags can burst and gently twist.
6. Now it is necessary to glue the bags one to one. Even if you don’t stick with glue, the bags can be tied with a thread.
7. You can make handles for a snowman behind the yard. The stink of slacking off in the very same way that the tulub, only vicorous bags of a smaller size are being made.
8. To make the snowman laugh, just glue on the thread.
Also glue plastic (igrushkov) eyes or fold them out of the paper.
For the nose, you can whip up a piece of carrot or make a cone from an orange paper and glue yoga (or seal it with tape).
9. Give the snowman a scarf.
For the bazhannya, you can look at the colorful paper stake and glue it like a Gudziki.
* You can make a mitla from three heels, and put a plastic bucket on your head or a lining made of fabric and paper.
We have a good day, today we work with snowmen from different materials. I'll show you how to make a snowman from paper, how to make a snowman from handy materials, like into a leather booth. You know on your side sprat master-class, so I’ll show you some ways to make a snowman with your own hands You can make a lot of ideas from children at once - for the Chergovskaya exhibition at the school on a winter theme, or for the competition of children’s new ideas on your robot.
And how about our series of virobivs zі snіgovіvіv great rozіrіv. I preach to you three master class, at some hour you will see GREAT SNIGOV.
Master class №1
SNIGOVIK from bags for smіttya.
In the photo below, mi bachimo garniy virib - the great snowman in capelus. It’s easy to kill a robot, it’s easy for a yak to kill it yourself. For whom should I go more smart bags, otherwise bags from the store behind the kut (the same vikoristovuemo bag of the package, de there is no colorful little one).
The basis of the snowman is a cone made of cardboard. A sheet of cardboard is folded into a bag (like for us), the edge is fixed on an adhesive tape or a stapler). The uneven edges of the bag are cut with scissors, so that they stand straight and straight on the table.
Bіlі bags for smіttya narіzaєmo on the square enough expansion. The more squares, the more fluffy the snowman will have, the more the material will need more vitreous. You can draw squares (3x3, or 4x4, or 5x5, or 6x6).
Get the glue - heat up the thermo-gun with a glue stick. A square of spitting is wrapped around like an olive - this is how we took the bundle from the sharp center, put a drop of glue on it and glue it to the base of the cone.
І the whole cone we need to stick in such bunches - gluing somewhere in the lower circular rows and so tier after tier we pass along the stake uphill
Now robimo drops for the snowman. You can make the shape of the bottom and sidewalls and watering the droplet and all the details of your choice from the cardboard. Can you make it easier- Paste a jar of olives with cardboard scraps.
You can do it easier: take a jar of yogurt, glue it to the edges of the wide drip fields with cardboard and sprinkle everything with black gouache (mix it with a rare sweet, so that it was applied well on plastic, and then sprinkle the sprat once with hairspray, paint the color).
Eyes and eyes are visible from black cardboard and krіpimo on the snowman - the best way to stick gudziki not to a fluffy coat, but to the very foundation - to the cone. For this, on the leather element, we put a toothpick on hot glue (as in the photo above) and such a gudzik on the long bottom is glued to the cone, breaking through the fluffiness to the cardboard.
Master class №2
YAK ZROBITI SNIGOVIK
from a modular origami.
All of us at the school start folding the modules from the paper, and then we pick up their paunchy vases. And as far as we can, then as a whole we have the power to pick up the paunches of the snowmen. Everything is simpler here, children will help you to fold the modules - in the evening at the table there was a TV set and a sprinkling of arches in the office paper, they cut straight-cuts and put modules from them. And then the coming evening from tsikh paper details - like from a Lego constructor - they took a snowman. The great volume will come out.
As a master-cob on a modular origami - then sprout for the cob of a small snowman - as in the photo above.
And if you have a good time and a trival of inspiration, then you will aim for a bigger project.
You can create a funny snowman Olaf from a cartoon using the technology of a modular origami. How to practice with modular origami ( how to fold the module itself, and yak їх to join one by one, I rose at the statue
Meister class №3
How to make a snowman
Z PAP'Є MASHI
on a povіtryanіy coolі.
The axis is lower than mi bachimo garny snowman of the great rose. Vіn vygotovleny z dvoh povtryanyh sacks.
The essence is simple that zrozumila - pieces of the newspaper are smeared with glue. For my knowledge, I’ll say - it’s not a penny (fork out a penzel) - just pour glue on the saucer, from the saucer with your fingers I grab the glue in the middle with my hand, take the papriets and straight down in a fraction of a second curl the newspaper pieces of glue and into the culture. grab new shmatok carried out with a glue hand and on the sack, and so on.
If the whole ball is pasted over with 3-4 balls of newspaper, it is too much to dry in the booth, or in the middle.
We’ll cut the knife into the sack of the hot part, there de tail - we’ll cut the gum bag, it won’t be needed. The first dirka is covered with masking tape.
Tsej zrіz will be the day of the snowman. And on the top of the big bag we put a smaller bag - I’ll also cover it with a newspaper in the back. fastened with adhesive tape or with a painter's line.
We close the scotch patches with patches from newspapers. And once from the press of the newspaper, a small sack of the nose is burned, then wrapped around it with a newspaper wet in glue - so that the wine becomes a big one. I kіlkom with balls of newspaper patches krіpimo n_s to the front part of the snowman.
Snowman's hands robimo also from jgutik newspapers, or darts. Robimo's hands are in the shape of a bun.
In my opinion, it’s better to take dry and harden yoga as a basis. Prodiryaviti on krіz lіvіy i prіvіy bіk snіgovіk - schob dart dart coming out of the left and right side. Wrap around with newspaper patches drіt, shape the fingers. Visushiti cover with brown gouache, sprinkle with hairspray.
WHAT YOU DO NOT HAVE WHITE FARBI. You can glue the snowman with a ball of white paper servlets (or white toilet paper) - 2-3 balls attach a newspaper font, and the snowman is filled.
And yet you can finish the ball of the toilet paper with a fringed look. Weide effect like in the photo below.
How to make a snowman
FROM NEWSPAPER KIMKIV.
It is possible for our family to manage without damaged bags. And just Arkush newspapers in Komi skochuemo. I potim tsі komi pasted with white sheets of office paper on PVA glue. For such robots, you can buy glue not in tubes - but from cebertsy, universal or everyday PVA (so it will be cheaper for pennies).
More piles of newspapers in front of him, like wrapping them with paper, rather fix them, so that the stench does not unfold. For which help grubka slivka, yaku valіzi in airports is wrapped.
Meister class №4
How to make a snowman
3 BOTTLES of yoghurt.
The yoghurt balls are often swollen to form and smooth wigini - a suitable form for a snowman. And the balls of milk made of white plastic are the perfect color for a snowman.
In the photo below, we have a snowman from a milk puff. The hat is folded from a double bag, the edge of the bag is formed and put on the neck of the bun.
And the axis below to the white plate is laced with a round head from a foam puff. On the coulis of the painted cheeks is that grin of a snowman, glued to his eyes. Cap and scarf from scarves or woolen cloth.
But remember that you don’t have a plastic spool, you can design a snowman’s head. wrap it with grub, so that the newspaper trims the shape of the breast. Let's fix the round breast on the top of the plate with adhesive tape. I gave the TSEY TEMPLATE for the future snowman to be pasted over with small pieces of newspaper, smeared in PVA glue (as we did at another master class) and let it dry.
After that, the dry silhouette of a snowman is zafarbouyemo in a white color (gouache or farboi-spill) and embellished with a robe.
Also, two small glasses of your yogurt or soft syrup can turn into a funny snowman. And as I bachimo on the master-class lower for the new one, simply and quickly grow it myself in the minds of the home, together with the children.
Master class №5
Snowman with thread
with your own hands.
The axis in the photo below is a cute snowman made of thread bags. Possibly, in the same way, they already bacheled earlier at children's exhibitions, like robots of other fathers. I choked on the openwork beauty of such seers of the lower snowmen.
On our website, I have already worked on an article with master classes. There you will know all the nuances of that. And here I’ll just give an infographic in cover photos that show the whole process.
How to make a snowman
from PINOPLASTOVYH KUL.
And now one of the best ways to build a snowman with your own hands. We come to the store "Vse dlya tvorchostі" and buy styrofoam coils there (more than two diameters - one is larger, the other is smaller in diameter). You can bring 2 bags, you can three ... or more. Wonder pennies - the stench is not expensive, the price does not bite.
Dalі zavdannya your simple - nadrіzaєmo sacks (zvіzaєmo topіvki) and zbiraєmo їx tsimi flat zrіzam at once. Rather, creak not only on glue, but also grind in the middle of the FASTENING ROD with a great toothpick. If the details of the cooler are fastened, it is better to sink with farboi. gypsum putty or varnish or paper servettes and PVA glue. Choose a bast coating for your viroba - in any case, it will look beautiful and low.
Deyakі smear snow with glue and sip sіllu - grains of salt mimic snow (like in the photo below). If you smear it with glue and cover it with thin pieces of cotton wool - the snowman comes out like a felting.
You can work even more beautifully - from a pine cone, pull a small piece of wood and glue the lower part of the snowman with them - dress Yogo in a caftan. And the drops of robit from birch bark from birch trees - weave a snowman with your own hands, like in the photo below.
It is possible to fold the details of the snowman NOT VERTICALLY, but under different hoods. You can see the tops from the scull with a frailty one to one, and vtikaemo toothpicks, also with a frailty - and the figures for the rahunok of which come out of the sginal. Like the Snіgoviki got sick, bent - like in the photo below the Snіgoviki, who are dancing.
The snowman can be put on a pedestal - on a sword, or on two long legs (as in the photo below). For sweating, the legs can be pasted over with a servette on PVA glue, domaging the need for labor and proportions.
Meister-class Pot-bellied snowman from halves of a sack.
For the preparation of such a snowman with our own hands, we need two coolers, the diameter of which is blown one and one is insignificant. One troch less for another.
Vіd kozhnoї kulі vіdrіzaєmo Trohi LESS THAN HALF. І cі urіzanі kuli skladєmo one to one pieces of zrіzu.
From the form or felt, you can see the details of the outfit of the snowman. І tsі details krіpimo to the body of the snowman with glue from a hot gun.
A scarf and drops of a snowman are rosemary with visor (felt-tip pens or farbs).
From foam plastic sacks, you can grow a lot of new varieties. The whole composition on the snowy edge with the cult of the cult team of the snowmen. Everyone fights for this very principle - zrіzaєmo tops of the cult and zadnuєmo їkh for the mіsce zrіzu.
How to pick up a snowman
zі SKLADNIKIV.
If you don’t use glue, then buy 2-3 pipes with cups of 100 pieces from the skin, then you can make a fire snowman. You can definitely pick up tsі cups wiymayuch їх зі smіttєvogo koshik zaruch z office cooler (like postal workers to zamovyvat more glasses - then for the snowman pіdіyde).
Such a virib snowman is even simpler. All you do is put the cups on the stake - like a round dance, densily to the center. Everything is fixed with a drop of hot glue (you can use squares of double-sided tape, you can do it well). And then we’ll put more cups on this round dance to the beast ... and once again - the docks won’t grow the dome (it will be half the sphere). Let us turn the sphere upside down with the first round dance, and on the new one we continue to build up half of the circle of the sphere to the other.
Following the same principle, snowmen sing for dancing in water. The cut quarters of the lower part of the plate fit exactly into the colo - wide to the center, and are called days.
Snowman weaving from newspaper.
Yak robiti newspaper jgut.
As if to open up a great newspaper sheet, and then twist it diagonally into a tube, weave a mіtsny and gnuchky jgut from the newspaper. From such newspaper thin tubes you can weave a snowman, like people weave cats.
Let's marvel at how easy it really is to just fight. The axis is a newspaper, the axis is turned on an olive, so that it was handy, a narrow tube.
So that the tubes do not unroll, you can fix them with a drop of glue. І narobiti richly rolled tubules in the back, put them in bundles, pulling them with a gum or a moth.
Cob wattle - tse 8 tubules. Klademo їх cross on chotiri little things. І qі chotiri on chotiri tubules INTERVERTED IN PAIRS - podsovuєmo one pіd one, as you can clearly see in the photo below.
Once upon a time, after tsikh chotiriokh tubules, mi kintsі tsієї kinked tubes WERE WEAVED ONCE EACH OTHER OTHER (they were simply remembered by the months) and they threw over the stepping portion of chotiriokh tubules. You can see it in another photo below.
We repeat it with ALL fours of the pipes of our cross.
I note that the tips of our first tube have become short. It means that it’s an hour to wait - for which of our stocks we still have two tubes and їx tips smeared with glue, we insert into the middle of the short ponytails of our fence. Tse is shown in the photo below.
After this raising, peacefully our cross bunches are in different sides. So that the tubes in the cross were sawn, like prominchiki in the sun.
And now our two podovzhenі kіntsi - go uzdovzh usіh promіntsіv, schoraz intertwined at the skin of them. Tobto kіntsі tubules bend prominchik, at which they intersect, changing hands.
So that our wattle was round - equal, and do not tighten here stronger, here weaker - it’s better to put a jar or a vase in the center of the wattle, and pull our wattle around the center of the form. So we repeat the even roundness of the can, and we take away the equal braid.
You can weave two halves of the SPHERE, then pick them up at the same time at the sack (as in the photo below), or continue to weave up the sounding sphere to the top of the spool.
After that, like a newspaper snowman is ready, yogo is stuffed with a sawed farboy from a spray can. I embellish with eyes, nose, gudzikami, hat and scarf.
Following the same principle, you can weave snowmen from willow vines. Such snowmen with their own hands can decorate a summer cottage, they are not afraid of stench of wood, like a newspaper, and serve for a long time.
How to make a snowman
FROM THE ONE THAT PID HAND.
the best ways.
You can just buy a pack of white toilet paper. Place the rolls one on one. From the cardboard you can see the eyes, the nose, the mouth, the hands-g_lochki. Take off your hat from an old woven scarf. The first axis of guilt is your snowman - stop smiling. Mily, cute and big. It is acceptable to marvel and not shamefully show.
It's a miracle way. I had a scarf with great strength. Re-tie the sock with a sock in the mountains and two in the middle of the sock, also robimo re-dressing. Let's take away the hot snowman. Robimo your figure and physionomy like that of the cartoon snowman Olaf.
Abo robimo more tsіkavіshe. Zamіshuєmo cool, tight salty dry. Three flasks of salt, three flasks of borosna, a couple of spoons of olії, so that it doesn’t stick to your hands - and it’s mixed with water. Water on the eye, until it becomes like plasticine. And then let’s add more flour, so that it’s as if it were tighter and harder. With a tight test, the snowman trims its shape the best.
And if you don’t take wheat, but IZHAN FLOUR, then the snowman definitely doesn’t settle down, trimming the shape well. Life is borosno to give the virob a brown color. But it’s not a bad thing - if I’m dry to a firm stand, then I’ll just make gouache or be some kind of facade farboi.
Also, the breasts from the dough can be fixed on the pedestal from the inverted miner of the flower. Weide new version. You can, on the basis of test and miners, build a happy family of snowmen.
You can sprout an arc of yaskravy barvistiy virib at the sight of a snowman Z Povitryanykh sack. Just buy zvichaynі round bіlі kulі and rіznоkolorovі kіlі-cowbaski for twisted virobіv.
If the snowman stands on the bottom, in the lower bags you need to add water - the stench will be the center of gravity for the snowman.
And even more, it’s hard to make a snowman out of a pillow. The simplest and most visible way - here only sew gudziki and nis gornuti zі shmatochka bright orange ganchirochka for mitt utensils. Tie up the pillows with a kind of homemade scarf, put on a hat (put on a simple hat, not a new-fashioned coat).
Snowmen from FELT,
How to call a snowman from the outside.
At once, someone is rich in hoarding feltings from the outside. The axis below in the photo of a mi bachimo like a fire snowman can be made from a large piece of felting for felting.
The best way of felting is the wet way. At the mist with warm miles of water, the breast inside sticks like a breast of plasticine. We just roll wet wool in our hands, and we slip into a sack bag. Three such bags give us parts of the body for the snowman.
You can call not obov'yazkovo kulyasti forms. І not obov'azkovo wet way. You can simply twist a piece of wool dry to the desired shape and stuff it with a needle for felting. It’s even simpler: you’re ticking with your bare neck in the throat, and in the face of that wine it will shrink and huddle into a narrow shape, you were given that yak to you if you burned.
You can well call the little ones and the handles of the snowman - and add them to the body to the head combed.
Pens-gіlochki squirm in a wet way, if the drіt is wrapped in a bundle outside, and roll on the table with wet miles hands.
Additional elements of clothing for a snowman can be made from felt and fleece.
You can work for a snowman to make a miter from the villi of domestic hair.
You can create a whole composition with snowmen, yalinkas, gifts, penguins and other characters that are suitable for a new theme.
The axis is so simple the idea of how to build a snowman from different materials. Alemy didn’t say everything yet.
This article is a continuation of ... to that, while I was writing all these letters - my hands were robbed and photographed again with new snowmen. Nezabar here zapratsyuє zapratsyuє zapratsyuє statyu s new robots - peacetime snowmen from paper.
In the meantime, it’s time to catch the force on the articles about snowmen.
Olga Klishevska, specially for the site ""
How do you like our site, you can keep the enthusiasm quiet, who works for you.
Privіtati іz Novim Rokom author ієї statti Olga Klishevska.
The snowman is one of the symbols of the New Rock - a unique gift-souvenir, an embellishment for the house or a toy for the yalinka. It’s not easy to make yoga with your own hands, and there are a lot of ideas for preparing original samples.
Ideas for experiments: how to build a snowman before New Rock
For a few years before the New Rock, we can already want to prepare for the holy day, for example, to build an independently original snowman. And do-it-yourself gifts and decorations are those that can be made better and prepared ahead of time. You can take care of them at the same time from the children. It’s better to paint with them. Until then, it’s a lot of work that you develop.
Snowmen with paper
A lot of ideas for the preparation of new snowmen - tse choice of paper. Dodatkovo for the decor, the toys are vikoristovuyutsya farby, bliskitki, gudziki, shmatochki yarn and fabrics and іn.
Photo gallery: do-it-yourself paper snowmen
Paper snowmen can be rozfarbuvat or, for example, embellish with lines. In snowmen, from paper cylinders, you can shove tsukerki on yalints Snіgovik with paper - one of the simplest options for making eggplant toys with children Shvidko is easy to make snowmen from smug paper of different widths, built near the castle A garland looms from the paper, the main elements of which are snowmen. Corrugated paper - also a cicada material, from which it is possible to make original papers before the New Year at the sight of snowmen At the same time, more fashionable straight ahead - large volumes of figurines from a thin paper The volumetric 3D snowman can be placed both on the leaves and in the kennel of the room - everything can be deposited in the same way
Snowmen from other materials
Yarn, caps in the form of plyashok, repeated bags, bags, jguti from newspapers, plastic cups, light bulbs, felt - this is why you can slay yaskravikh and unimaginable snowmen. And deyakі models are embellished with knitted scarves, paper droplets, mіtloy z gіlochok and other items, roblyachi їх unique and individual.
Photo gallery: different options for preparing snowmen before New Rock
You can use plastic spoons to make garnishes from looking at snowmen. Felt of any color vicory for the creation of cute yalinkovyh igryashok-snіgovikіv Light bulbs are an indispensable basis for preparing snowmen before New Rock From plastic cups to shatter the great snowmen. Crisps from glassy dances can also be beaten for virobivs at the sight of snowmen Little snowmen with pompoms, picked up by the vines - an original decor for an apartment near Novorichni Svyato Z yaskravikh and monotonous scarves, filled with padding polyester or groats, snowmen swagger You can decorate a snowman with foam plastic bags with a hat and a scarf with fabrics or tied with yarn. Navit packages to go for the meeting of snowmen before New Rock The technology of the modular origami has millions and millions of snowmen A simple way to create a novelty toy is to knit on knitting needles From the rods of willow or newspaper jgutiv you can weave snowmen of the great rose Needleworkers can sew a snowman with beads, having made a hamanets With a fleece or with an extra fleecy fabric, you can sew a snowman One of the simplest, yet most effective options is a snowman, calling from white outside in a dry or wet way. Coolers for snowmen can be made from soaked paper - masi papa-mache, and after hanging rosefarbovuvat acrylic With round saw cuts of different diameters, it is easy to build a whole bunch of snowmen. The snowball can be knitted with a sackcloth from chenille or other fluffy yarn From a bag and a bag for ping-pong, a snowman for the Christmas table comes out literally for 3 hvilin. Small funny knitted toys are called amigurumi and today such a snowman, as it seems. "in trend" From an empty dance and a polymer bag you can make a "clear" snowman
How to build a snowman before New Rock with your own hands
No special skills and special materials are needed, so that with your own hands you can make snowmen to the New Rock from old childish hats or scarves, as well as from worn bags and threads. Troch zusil that hour - and the bread will be ready.
Snowman with baby hats or scarves: cover instructions
For robots you need:
Cooking order:
- The upper part of the white scarf is cut and tied from one side with a thread. For whom you can vicorate a thin gumka.
The basis of a snowman - harvesting from a white scarf
- Remind me to prepare groats and tie another knot with a thread
- The other toe is divided into three parts - a toe, middle and upper part with a fifth.
- Take the middle (these clothes for the snowman) and pull on the workpiece.
A colorful sock is made for the robe of a future snowman, so you can choose whether it’s bright colors.
- The upper third of the workpiece is cremated into the lower part for an additional thread so that a snowman is formed.
For the molding of a snowman, I will prepare a tie with a thread across.
- Sew on namistinki and gudziki, insert a stylus like an olive in that place, de may buti nіs.
- Put the sock of another sock (coloured) on the head of the snowman. Tse yoga hat.
To decorate vicorist, use gudziks, embellish namistinki and others
Snowman with twisted sacks and yarn: cover instructions
For work it is necessary to prepare:
Work order:
- Cover the bags with vaseline and oily hand cream. This is necessary for saving the shape of the workpiece (the threads can stick to the surface of the bag, and when pierced, change the shape of the workpiece).
- Wind the yarn on the bags, satisfying whether it's a visor. Golovne - sob the winding was equal. The thinner your threads are, the thinner you need to spin the “ball”.
Before winding the threads, the surface of the sack is washed with a lotion cream
- Gently bleed the threads with PVA glue.
- Seal the workpieces until the glue hangs completely.
- From paper, robiti eyes and nіs, virіzati gudziki and mouth. It’s good to go out of the red or orange paper (cardboard), bent at the looking cone.
The leftovers of the bag need to be cleaned up carefully, so that the threads of the blanks are narrower.
- Pick up the leftover bags.
- Glue the eyes, the nose, the eyes, the legs on the thread blanks
- Glue the blanks so that you see a snowman.
Gudziks, disguise, legs are glued on the thread of the snowman's blanks
- Now you can carefully pull on a new light hat and scarf. Before the speech, such a broken snowman can not be put down, but moved.
Choose the best idea and start such creative work. We don’t have a lot of time, a little imagination and available materials - everything you need to build new snowmen.
What kind of Novy rіk can do without souvenirs and toys? Accept them, bathe them, give them, embellish the houses with them, and also accept them independently. We already know the impersonal ways of making yalinka with our own hands, while working yalinka toys-bumps and sewing novelty chobitki, and today we know about those how to make snowmen with their own hands!
Before that, how to build a snowman with your own hands, stocking up on materials (the size of ready-made snowmen is 25 cm):
- White terry cloth
- Light green or green terry cloth
- Fleece be-yakikh kvіtіv
- Holofiber or something else
- Black beads
- glue
- Threads
- Golkoy
- Pins
Shiemo of the snowman
Snowman's body
A snowman made of cloth with his own hands to fight from three bags of different diameters.
At one's own line, the skin sack fights from six wedges. For whom I took, I used terry cloth and folded it. We gave a wedge in such a rank, so that three details of the skin rosemary were seen. Between the details it is necessary to fill in a small amount.
The width of the wedges varies diagonally and upwards:
- 10.5 cm
- 8.5 cm
- 7.5 cm
We put together three details of the skin rosemary, creaking with hairpins and stitching on a machine.
Vivertaemo and stuffed with holofiber. We take beautiful round sacks for making snowmen with your own hands.
Shiemo spout
Let's move on to the preparation of the nose. Fight wine from orange fabric. For this її, it is necessary to fold the navpіl and name the tricot, then sew it on the machine or manually, and fill it with the winder.
With a hidden seam, it is not fastened to the head of a snowman.
Sew on eyes
Robimo hands and feet
The legs of that hand of the snowman squirm from the white terry cloth behind the help of the paper pattern.
Stitched, wiverted, stuffed with a povnyuvach, sewn open with a hidden seam.
Handles of a snowman
Snowman's legs
In order to attach hands to the snowman's coat, vikoristovuemo thread method.
The snowman himself is ready!
Clothes for a snowman
Shimo cap
Let's dress up our snowman in a hat to fight with fleece. For which a straight cut is made with a size of 21 * 15 centimeters, it is folded up and stretched.
From one side of the workpiece, cut the edge with scissors in a zigzag shape:
And for the rest, with such scissors, we cut the wives of the fringe.
We put on a hat on a snowman, turning the base of the head. The fringe on the poppy is taken into a bundle and tied with a small fleece.
The edges of the cap are glued.
Robimo scarf
Zavyazuemo yogo on a snowman, she proceeds to the preparation of a mitten.
Snowman gloves
For whom, I will take a new fleece jacket, fold it, sew it, stitch it and wivert it. Zrіz along the edge is made out with a zigzag.
Yalinka with textiles
In the final stage, we make a yalinka from light green terry cloth. For whom we plan to make a tricot with a size of 17 * 16 centimeters.
Folding yoga navpil, prostochuemo, not forgetting to leave the opening for reminding.
Do-it-yourself snowmen on the New River are even wider as an element of decor. It’s awkward to grow up, like building a snowman with a paper, fabrics and threads, that stench is manifested in apartments in different vikonanni and forms. A cute winter character brings calmness to the atmosphere of special vistas. Win a fortune about the fun of the children of the yard, games and about good cartoons.
How to make a snowman with paper
Paper snowmen look light. The stinks fit into self-contained garlands, hand-stitched on the needles of a new yalinka, or they can be stable, to win the function of the statue or decorate the table.
Figure from cylinders
Materials:
- arkush white paper;
- cutting of colored paper;
- marker;
- plasticine (neobov'yazkovo);
- glue.
Paper should be cut into three smugs. The length of the workpiece sets the height of the furrow, and the width - the width of the snowman. The skin is advancing, but the troch is short and already in front. Smuga twists into a cylinder and sticks together. While fastening pidsikhaє, manually fix the mіstsya with pinches for whiteness. Three cylinders are glued together behind each other. Varto stitch, so that the smaller details were stitched in the center of the great ones.
The form is ready to be decorated with gudziks from plasticine. Eyes and mouths are painted on the smallest cylinder with a marker, or they can be seen from paper. Carrot nis - trikutnik from orange paper is glued with no more than a base. Vіlna vershinka nadaє mnogo vglyadu person. Decorative elements can be made from plasticine.
Models from flat figures
Kuli for a snowman can be molded from paper smog. Nearly 6 blanks of a zavtovshka 1-1.5 cm are rolled up in rings, fixed on the ends with glue and assembled into a single structure. In this order, 2 details are prepared. Mensha is embellished with eyes and a nose from an orange cone. The place of a double sack is decorated with a stitch, or with a male fabric, so that it looks like a scarf.
A bag of two keels of one rose can be embellished with a flat image of a snowman's appearance and dressed up on the butt of a front snowman. In order to pick up a bag from flat keels, it is necessary to glue two parts between each other, until the first one closes with the rest.
Puffy snowman
From corrugated paper and plasticine, a pretty fluffy model is selected. For which you need to download 2 coolers of a different size. It’s better to use white plasticine, in case of failure, I’ll prepare any color, I can just smear it with it. The basis for great blanks can be downloaded from servettes and wrapped with plasticine.
The paper is cut into squares with sides 1.5-1.7 cm. Kuti details are wrapped up and folded up, the workpiece is wrapped around the shear so that the tube is hidden. The sheared cut is built into plasticine. A detailed part is fixed in the kuli, and on the swifts a new one is formed. So it is necessary to continue row after row downhill, until the whole snowman is covered with a fluffy ball.
Figure from a cone
From the arch of the paper, the next vir_zati is equal to the colo. Let's just use an olive on a volute to draw 2 perpendicular lines. One of the 4 sectors that appeared, slid out, and the edges of the edge overlap and glue. One side is embellished with an appliqué, or with small disguise, hands and gudzikiv. The head abir, the scarf and nіs virіzayutsya from the paper. To Morkvin it is necessary to replace the tricot of a double-sided orange paper, folded navpіl and gluing the top to the detail. The character looks original in a cylinder, but you can also forgive the design by simply dressing the animal with a smaller cone of a different color. The cylinder is glued together with two papers and one kitchen.
Snіgovik zі shkarpetki
With your own hands you can make a snowman from a scarf with your own hands without stitching. As a result, we saw m'yaka figurine at the costume.
Materials:
Pokrokov's instruction.
Making a virobu from threads
The skin booth has white threads. Without special forms, it is possible to sporudit kuli for brew.
For the first option need two refills. It is necessary to inflate them to the necessary size and, for additional adhesive tape, give them a spherical shape. Crisp tube of PVA is stretched with a white thread. The head is lifted, and the thread is carefully wrapped around the sack, laying the coils crosswise, so that the great foxes do not fall on the surface. Work with others in the same way. All the details are glued together and embellished according to the principle of the front.
For another option spin two pompons. For this cardboard, two identical rings are marked. The thread is wound on the ring. The more yarn you will vikoristano - the more fluffy weave the pompom. After that, as the entire surface of the ring is bound under the decal with balls of winding - the knife is pulled through between the cardboard boxes and the threads are cut. The details of the pattern are loosened, and the threads are knitted with the center. For pompoms of a small size, you can vicorate a fork.
To the smallest pom-pom, the eyes are ready for soft toys, or we really have that stylus of an orange olive. I'm ready to sew my head up to a larger pom-pom.
Snowman made of hand-made materials
For a snowman, everything that can be found in a booth is practical, and even far away you can guess the sphere. A light bulb that has burned out can easily be turned into a snowman for additional gouache. On the farbowed in white skl, hands-gills and buzzards are depicted. The basement without additional manipulations casts a cebro, under it it is necessary to paint a disguise. A line on the transition to the part that expands, replace the character's scarf.
Realistic-looking figurine made of cotton wool. For a robot, it’s nice to need a container from water. It was necessary to split the wall into three nerve parts. Smaller for the head, and larger for the lower part. Fingers are touched, and a sphere is formed from a small piece of wool. The material is added step by step, the docks do not reach the required size. This technique has three details. Kulі as a result of the blame to be smart.
Finished details should be left out until the final hanging. The snowman sticks together for the help of a special pistol or PVA. Hands can be worked in the same technique, with a dart, or two small needles of a similar size. Nіs і ochі cling іz plasticіnu аbo z pofarbovanої cotton wool. You can sew clothes for a snowman from non-essential fabrics for a bazhannya. The character is up to wearing a hat and a scarf.
The old licked bag is easy to renovate, transforming yoga with his hand into a snowman. I've got a toy to get from the whites. From one side, introduce a marker to reduce the appearance.
Flat snowmen
Flat snowmen will successfully get together in long lances and replace garlands. The silhouettes of the characters, which are held by the hands, require only small touches to complete the image. The snowmen look original from two parts. The lower sack depicts a snizhinka, the upper one - a ring with painted faces. Snowballs are decorated with cylinders, scarves and mittens. A crisis of small snizhinok stretches out a line and the figures are fixed at the new one.
So that the children would have more fun than the checks of the holy saint, at the sight of a snowman, you can glue the special hybrid of the anniversary of that calendar. Outline the heads, a scarf and a headdress need to be drawn from a thin paper. Become a person as a dial. The number of traditional twelve numbers on the new one will need to be divided into 31 sectors for the skin day of the chest. On top, embellish the painted appearance of a snowman, and replace the arrow with carrots. For this yoga, it is necessary to fix the wide edge with the center behind an additional bolt so that the wrapper is zdіysnyuvalos with a light susilla. The arrow can move on its own.
Three stakes of different rosemary, glued between themselves, make up the embellishment of the looking snowman, who lifted his head uphill. At the least, the eyes are embellished with a large nose, which is washed uphill. The flat silhouette of the droplet is ruffled along the edge, and the hands-nails are glued opposite one to the other details. Such a pattern can be sewn from felt.
Characters from cartoons
Children should be recognized by decorative toys familiar to them characters. Other changes in the design can make it look like a snowman from a cartoon. We have grown old to evaluate the strength of the radian animation.
Olaf do it yourself
Olaf is inspired by traditional snowmen from three spheres. Whether any method is more suitable for the preparation of Olaf, it is also necessary to protect the peculiarity of the statue and the image of the character.
Characteristics of rice:
- The hands of the cartoon Olaf replace the needles.
- The snowman's spool has a splashy shape, and the head of the troch is larger than the middle figure.
- The upper segment may have a shape with a marked expansion of the cheek area.
- A wide, great, smiling mouth takes up half of the guise.
- Zachіska іz trоkh raztashovannyh close to one gіlochok - obov'yazykovy attribute.
- Two breasts of snow serve as the feet of the snowman, and the costume is embellished with great black wolves.
shobbiti Olaf from polymer clay need to download two bіlі kuli. Offended, it is necessary to squeeze between your fingers, so that the stench became a shape similar to a round low pouffe. For the lower legs, two smaller bags are needed. The stench roams like a doshka, to form a low truncated cone. Toothpicks are inserted into the lower sphere, the legs are attached to them. A toothpick is inserted at the top for the head.
The head bag sounds with fingers up to the poles. It is guilty of viide to stand similar to a rhombus with rounded contours. For the appearance of roundedness, the trochs are flattened uphill and a small expanse is straightened up from below and to the beast. A hostile subject is the failure of a company. Outline the trochs twisting forward. In the center of the beast, there are two handrails for the eyes and one more nose, three below them.
Cherguyuchi flat mugs of black and white colors, shaped eyes. Empty mouth fills with black clay. A carrot from orange plasticine occupies the space of the nose, and two flat white teeth are glued on the edge of the sweating. Zachіska can be made from thin cherry bait. Above the eyes, there are thin brown coats - rounded eyebrows.
If the disguise of Olaf is ready, the head is put on a toothpick. At the middle of the bag from the sides, insert hands-g_lki. Three black bags with plasticine are glued to the construction at the vertical line on the gudzik square. The figurine is ready to lock.
Snіgovik Postovik in the form of a soyuzmultfilm, one is struck by a massive belly. The transition from the thoracic part to the cerebrospinal part is smooth and weak. With fresh rice, a new bucket on the head and a bright red scarf. No deep sounds, and eyes set wide. Figures are thin and small. The hands of snow and old clenches the traditional mіtla. The character from the cartoon "When the Yalinks Fire" is similar to the Postal Service, but the hands of the youmu replace the needles in the mittens, and the wind on the head is supplemented with a crack.