Mushroom from cardboard on the head. Do-it-yourself boletus mushroom carnival costume

Top. There was a light yellow shirt. More shortly, її the sleeves will be on the gumtsі, zі zbіrkoy, so that the shirt and її sleeves were pishnіshimi.

Bottom. Wide harem pants made of curly waist, on humts (Fig. 1). Sob harem pants were trimmed, straps from fabric are sewn to them, from which the harem pants themselves are sewn. The width of the straps is 1-1.5 cm.

At the bottom of the bloomers, “grass” is sewn on. For this green fabric, cut with cloves (small 2), and then sew to the edge of trousers.

Like a thin fabric, її it is necessary to starch in front. Sob, not all the “grass of grass” however, “was valued” at the bottom of the bloomers, you can also attach the bloomers to the fabric with stilts (like it was at the very top, like in the middle thinly).

On foot. Brown or green laces.

On the head. Kapelyuh, crushing in this way (Fig. 3). From the thick foam rubber an oval is formed. At the middle of the yoga - opening for expansion of the head of a child. Sob I will open the edge of the opening and torn, the tasma is sewn to the new one (on the hands over the edge), to which the ties of the droplet are attached. The top of the cape (tezh oval) is cut from the thin fabric, moreover, it should be made three times larger, and the bottom should be made of the oval with foam rubber. Under a thin fabric, it is better to put a thin foam rubber. The fabric is sewn to the foam rubber on the whole stake on the hands.

drop top- Mustaches of brown. The bottom is white or slightly yellowish.

Kapelyukh to fight either with bands, so that you can tie them up to pidboriddy, or on rubber bands (white or drip).

You can plant a little sun on the droplets (small 4).

For preparing sonia it is necessary to cut a red cloth with a diameter of 8-10 cm, put a piece of cotton wool in the middle (Fig. 4a), and an oval of cardboard for the beast (Fig. 46). Tie the fabric along the edge onto a thread (small 4c) and pull it together. Folding rozpodіliti equally. Open again tighten and close (Fig. 4d). Tse - the bottom of the sun. Feet and whiskers are sewn on here (Fig. 4e). Legs - 3 darts, bent at the ends. Vusiki - the dart is thinner. Tighten the body of Sonechka with a black thread. On the back with a marker, paint the kukhli and sew on the front two napkins - eyes (Fig. 4e).

Props. In the hand of a child, you can give a green leaf with a petiole (div. distributed “Preparation of leaves for that leaf”).

Instruction

A fly agaric suit looks bright and staggering, it’s easy to kill yoga. You will need a shirt and trousers of beige, white or yellow color. Take the sleeves and the bottom of the pants with an elastic band. Paint on green fabric or paper blades of grass, leaves, fold and sew or glue to the bottom of the pants. Grow a shirt-front from red fabric into white peas (you can paint peas on fabric yourself). You can add a fly agaric costume with a cape made from the same fabric.

For a girl, sew a red-coloured bed and a white blouse. Embellish the cuffs and comir of the blouse with blades of green fabric. Embellish the bottom of the bed with an applique of mushrooms.

The main detail of the costume is a hood. The simplest option is to make drops from paper. Take paper paper: whatman paper, thin cardboard, cut a circle with a radius of 40-45 cm, turn it with a cone and glue it. Sprinkle a droplet near the red color, spread the big white stake with the red field. Attach to the droplet of the tie with tasmi or an elastic band.

You can also make droplets of fly agaric mushroom from an old felt or straw droplet with fields. Take a piece of scarlet-coloured fabric and tighten the frame. Paint large peas on fabric with white acrylic farboi.

Similar to the fly agaric mushroom, you can make a childish costume of a boletus mushroom, different in colors and shapes of a droplet. There was a shirt, brown pants, and a waistcoat that went like that, so i. For the preparation of a drop, take foam rubber or batting, as a frame, vicorate droplets with fields. Cover the thulle with foam rubber, to give it a swollen-rounded shape and sheathe it with brown fabric. The inner part of the cape is covered with foam rubber, sheathed with white fabric.

A more folding option is a drop at the beret's beret. From a white or beige fabric, make a base - a swag 10 cm wide and a long, which is a good head cola. Rotate її navpіl and lay with glue fabric for the given form. Cut out the top of the droplet from the brown fabric in the form of a stake and also around the edge of the light fabric. The light fabric has a wide opening, the diameter of which is the most beautiful head. Fold the stake with the right sides in the middle and sew, then wring. In the same way, beat the lining and hitch with the top.

A new evening is approaching in the chest at the school or the garden, and obviously you are turbulent in preparing a new costume for the child with your own hands. As soon as your son’s or your daughter’s happy mood played the role of a boletus mushroom, or a pretty one, then our master-class will singfully help you. Aje Meister, who, having created the image of a mushroom for his child, having made not only a side photo, but also described the whole process of creating the carnival costume of a boletus in detail.

Yak sew a boletus costume to a new rock: MK z photo

In order to create such a garniture of new equipment for a baby, you need:

• foam rubber 5 cm and size 50 x 140 cm.
• (you can replace the foam rubber with a padding polyester, as a way to build a cardboard base with a droplet of a mushroom);
• brown fabric for the top, drop size 70 x 70 cm;
• light-beige fabric for the lower part of the droplet with a size of 50 x 50 cm;
• bavovnyan fabric for interior decoration kapelyuha size 35 x 50 cm;
• milky-white fabric for overalls with a size of 150 x 70 cm.
• a bunch of green fabric for leaves with a size of 20x30 cm;
• kіlka kotushok thread pіd kolіr fabric;
• tinsel for trimming dozhinoy 2 meters.

Do-it-yourself boletus mushroom drops

1) Let's prepare the details: let's look at the foam rubber first, which is the support of the bagan droplet. I have first about a diameter of 50 cm, visible under the top edge of the foam disk, rounding the yogo. We are working on the blank of another disk, looking beyond the borders of the edge that we see. Following this principle, I will prepare the third disc.

2) We look at the disk center, focusing on the head of the child. For this one in the center of the first stake, we draw an oval, the perimeter of some old old stake of the child’s head plus 2 cm. As a raptom cut for the head, a great one appeared, you can make it up, making a smaller cut at the step disc.

3) - 4) We store all blanks with foam rubber "pyramid". A fourth disk without a hole is shaved, forming drops of a mushroom.

5) Sumy mustache disks so that there were holes for the head near the looking ovals.
6) Let's go through the disks by hand, bіlya edge, shіlno z'єdnavshi їх one with one.
7) Virіzhemo from brown fabric (I have velveteen with a wide husband) a cape for the top, focusing on the height of the “pyramid”.
8) We cut the same spike from beige fabric (I have velveteen with a narrow collar) for the lower part of the droplet with a diameter of 50 cm. We cut it in the new hole in the center for the head near the looking oval, the perimeter of this old stake of the child’s head is minus 4 cm, we cut the edge cut through the overlock.

9) - 10) We sew two blanks of fabric, folded with their front sides one to one. Laying a row, neatly moving the edges, loose folds on the brown fabric. Wyvernemo blank for capelyuha on the front side.
11) - 12) We burn the yakomoga foam rubber tighter into a roll, we put it into a droplet of fabric and carefully straighten it, one by one, there are holes for the child’s head.

13) We sew a “hat” from the added fabric for the inner part of the cape. For this cut, there are three blanks: a rectangle with a width of 10 cm and a length of 35 cm and two identical pivkol with a long arc of 35 cm and a base of 18 cm.
14) Lay two rows, sewing the fabric with the front side in the middle, joining two stitches with a rectangle along the edge of 35 cm.
15) - 16) We put the “cap” into the caps so that the edges of the rectangle (the middle part of the “cap”) were bent over the nave parts of the oval opening for the head. I’ll take the “hat” by hand.

17) We put green fabric with the front side in the middle and cut a leaf - embellishment for the droplet.
18) We sew the edge of the sheet blank, not completing the row by 2 - 3 cm in order to turn it on the front side.
19) Sew a piece of paper to the droplet, turning the studs in decals.
20) I’ll embellish for the droplet at the sight of two bags of tinsel.

21) We store the fabric for the overalls (I have fleece) with the front side in the middle and, according to the variance, a basting with a seam allowance of 5 mm. Cut out the fabric.
22) - 23) Bag front and back halves of the jumpsuit face down and overlock seams. Also, cut through the lower leg of the trousers and the neck.
24) Wyvernemo overalls on the front side.

25) We will sew by hand in the neck of the tinsel.
26) Weakly from the excess of beige fabric, the intestines and workable on the overlock.
27) - 28) Sew the gut to the jumpsuit and decorate it with tinsel.

A wonderful new mix of boletus mushroom is ready!

After spending a few years, you can make with your own hands an enchanting new mushroom costume for a boy or a girl. A self-contained costume is not between the hands of a child and the delight of the eye with its beauty and originality. To that, you have already decided to sew up to the new fate of the brand, syrojka, boletus or fly agaric, you can marvel at this photo of the master class and pokrokov together with us prepare a costume and drops of a mushroom.

How to make a new mushroom costume for a boy with your own hands

Do-it-yourself fly agaric hat

Virіzaёmo from cardboard with a diameter of 45 div.

Z stake required a cone. For whom the segment of the stake is viable.

We form a cone.

We take red cloth. It is small on it with the same diameter, like a cardboard ring. Robimo allowance 5-7 cm.

We insert a gum.

Virizaimo 12 mugs. Six pieces of white fabric and six of organza.

Pin the mugs to the main fabric. Let's sew on.

We take piece leafing that fruit. Let's work on the composition. Glued to the drop with a silicone gun.

We dress the fabric on the cone.

A fly agaric drop is ready!

Robimo Jabot

Beremo 2 pieces of organza: red and white.

Curl the top edge. Let's sew again.

Glue the piece of apple leaf with a silicone gun.

The axis of such a frill was with us.

The top of the suit was a shirt or golf.

Shimo pants

Vikroyka shukayemo in the Internet or magazines. It is also possible to sew trousers for a vicorist dress for a child's costume. I'm cutting my pants. We sew all the details. We insert a gum.

Suit ready.

Happy New Saints!

For an hour, put the task in front of the fathers in front of the fathers, yakі smoothly zdіysniti. Most having been inspired by most mothers and tat viklikaє we can make some themed masquerade costumes. And as if you were wearing clothes for something else, you could put them in a child’s wardrobe, then you could put on a fly agaric hat or a cat in the wound, you know far from a leather dad.

Simple option: from cardboard and paper

As early as we call soon, and there is no time to sew a folding droplet for a mushroom, try to make yoga from handy stationery materials. Fly agaric hat with paper or cardboard weide nitrochi is not worse for textiles, so you report trochi zusil. Cut out a column of paper with a large diameter. Make a hole in the new hole with a radius and glue it in such a rank, so that you have a low cone. The second option is to make 4-5 incisions and glue them together with a slight spade. Check while the workpiece is dry, then fetch її at the red color. Your fly agaric hat with paper mayzhe is ready, you only need to make a tie and stick it on the upper part of the mug of white paper. At the same tekhnіtsі droplets can be zrobiti once from a red cardboard. Respect - obov'yazkovoy rule the fitting at the stage of preparation. If you are less powerful, go to the decor.

Reworking an old dropper

Or just make a fly agaric hat with some indecent carnival attire. Naygolovnіshe, schob vhіdny kapelyuh went to the children for the expansion and mav zhorstka fields. The base must be sheathed with foam rubber, giving the shape of the mushroom. You can work quite well, closing the droplets on the margins around the small pieces of material. The preparation is ready, that її form suits you. How to make a fly agaric hat from such a foundation? Everything is even simpler - sheathe the bottom side with a white or light beige fabric. The top of the headdress is next covered with a red material. The final stage is to get a gum or stitches for fixing the headdress and do not forget about decorative mugs made of white fabric. Korisna porada - you can embellish the headdress in the same way with white paper elements.

Shiёmo for all the rules

Tim, who wants a little bit of sewing and is ready to spend a good hour preparing a fancy dress, will have our instruction on how to make a fly agaric hat from fabrics and handy materials. If you need yoga, you can pick it up at the grocery stores. On this material, there is a small stake, an increase in the diameter of the future droplet, and in the center there is another smaller stake, equal to the stake of the head of a child. Virіzaєmo tsyu detail and robimo sche kіlka іz th material. Okremі elementi creaking among themselves. They gave us the need to give the bulge of the upper part of the cap. For whom we put foam rubber balls. An alternative option is the creation of the correct form: to make an incision and to glue the backs of polyethylene, like in the option with the preparation of a droplet from cardboard.

I’ll prepare what came out, sheathed with red and light fabric. Kitchens are sewn onto the upper part. Your kapelyuh is ready, only the ties have been sewn on. If you don’t like to sit on a child, try to sew a base-cylinder at the inner opening. It’s even easier to make it: take a piece of backed polyethylene, make a new husband, which is more expensive than the girth of a child’s head. Creak a straight cut, scho wiyshov, in a ring, fit it with fabric and sew in the middle of the cape.

Original ideas

A fly agaric hat in the garden can be vikonan and in combined technology. To make such a headdress, build a base from fragile cardboard, and then tighten it with fabric. Cicava is an idea for those who have an uncommon soft cap with ties - you can sew a small cap of fly agaric into a thick droplet of fly agaric. You can give the necessary shape to the fields, vicorist, to finish hard foam rubber. fly agaric in the technique of claptop stitching? For whom you happen to be far behind to paint a vikrіyka of the upper red stake with big tsyatkami, which are sewn into the new one. Korisna porada: Guess the right fly agaric, hіba zavzhd they even interspersed on droplets? Try to find something that is not ideal for the shape of the mug, add asymmetric patches.

How to decorate the headdress?

Ready drop of fly agaric can be sprouted tsіkavіshim. Most often, such costumes of the fathers ask to be robed until the holy autumn. Vіdpovіdno, dorechne rіznokolorovoe leaves, scho "stuck" to the droplet. You can embellish such a headdress with komakh figurines. Now you know how to make a fly agaric hat with your own hands. Ale first, take up the work, rejoice in the caregiver of a child's garden, or an artist's kerivnik. Most often, in the case of fathers, it is necessary to prepare the most similar one-on-one headdresses.