Yak miryati v_kno roller blinds. How to designate the size of a roller blind on a plastic window? Correct pidbir
Curtains with a classic cut are always up-to-date. Ale stinks don’t wait to come to the inter'єru primіschennya chi not everyone relishes. In such a situation, the only correct way out is all the rolled curtains. Tsej curtains - Tse vodrіz fabrics, a kind of fastening to the beast of the window on the shaft. Basically, the wines are rolled down to the beast. The main mechanical mechanisms of such virobs are mechanical and automatic. The automatic winder is more handy, lower mechanical, but, unfortunately, more expensive.
Before that, how to buy roller blinds, it is necessary to correctly measure the dimensions of the window.
Roller blinds have two main types:
- closed;
- vіdkritі.
The mechanism for opening the roles is much simpler, because a new animal has no shaft, which steals the fabric. Koshtuyut stench is an order of magnitude cheaper, but roam more often. Close the curtains to shut down the shaft and are most often equipped with an automatic lift mechanism. Vartist of rolled curtains to lay down in the capacity of components. In addition, each type of virobi can be distinguished by color and type. It’s even easier to build roles independently, and it’s better to make them better, while protecting your window.
The stench can be of different colors and monophonic. Materials, from which stinks are prepared, are the most versatile. In the next group there are curtains, which are called "Day-night". The stench is made up of two smug fabrics. At the closed camp, the stench may look like a single whole.
Selection criteria
If you go to the booth about replacing old windows with new ones, then you will blame the food for decorative warehouses, more precisely, about curtains or blinds. With the advent of plastic windows, it has become fashionable to use roller blinds in interiors. The stench is richly practical and suchasnishі. Choose roller blinds for your room according to the following criteria:
- chi sleepy side of you;
- what thickness is needed for fabric;
- type of fastening - on a chair, a window frame, on a wall, at the schila or a stele;
- vіdkrita chi closed system;
- choose fabric color.
Usі ts_ points it is necessary to check the choice of roller blinds.
Select fabrics
Fabrics for roller blinds can be divided into different groups according to the thickness of the material:
- Persha group- all lightly filled fabrics. Do not give a significant darkening of the stink, but play a more decorative function. The colors of the fabric should be victorious, if it is necessary to reach the effect of a slight darkening and vicorist, only as an element of the design of the vicons. Napіvprozorі fabrics vibrate, more importantly, with a little.
- Druga group- thin fabrics, yakі zabezpechuyut suttєve dimming near the room. They can be like a little one, so they are monotonous. Їx next victorious for the dead son. The stench can be like a decorative function, so it’s a sonzezahisnu.
- Third group- Tse duzhe schіlnі fabrics. It’s better to victorious in the presence of a strong sun, for example, if you have a pivdenny side or a great window. The cream of the sonsarchic function of the stench is also vicorous as a decorative element of the design of the window. Qi fabrics are made of small and monophonic.
- Fourth group- blackout fabrics, otherwise blackout. Buvayut from small and monophonic. When the roller blinds are lowered with fabrics, wind in the middle of the day, if the sun shines, your room will be completely dark.
See the reinforcement
They were appointed from fabrics. Now it is necessary to close, as if the roller blind could be creaking. If you have hanging curtains or tulle, then the best option for attaching roller blinds is on a chair or on a window frame. Like a sprat chair - two, three, or more, like, for example, on a balcony, it’s better to install a curtain on the skin of a chair okremo. You will be smarter.
If you don’t have any great curtains, or tulle, or you are planning to rent them, then you will have an option for attaching a roller blind to the wall (like a wonderful cornice) or an option for attaching it to a bed.
Although the first option is to attach it to a chair, or the window frame can also be seen. For example, in the kitchen, instead of a wonderful tulle, which is constantly smeared with wine, it is possible to vicorate a closed system of roller blinds. The shaft made of fabric is closed with an aluminum box under the color of the window, along the edges of the aluminum space is placed directly, also under the color of the window. The stench serves as a fixation of the fabric.
Zavdyaki to the fact that the virus from the closed system creeps without interruption on the vіkno, vіn povnіstyu in the distance from the main dzherel zabrudnen, for example, cook those miyki. The very same virib to serve for a long time without additional purification.
Rules of the world
To choose and buy suitable roller blinds, it is necessary to correctly measure the window. For whom it is necessary to specify the following parameters:
- Width. For correct alignment, the width of the glazing bead stick to the ramie on one side is indicated, and the glazing bead stick to the ramie on the other side - this will be the width of the fabric. For roller blinds with a double-type mechanism, the overall width of the roller blind will be 38 mm larger than the width of the fabric behind the upper side mounting brackets. Vimiryan in such a rank, the roller shutter completely closes the cladding and the glazing bead of the window, which secures the maximum overlap of the opening.
- Height. For the correct fitting of the fabric role, it is required to expand the width of the glazing bead up to the frame from the bottom to the glazing bead stick to the top of the frame. The expansion of the roller shutter mechanism is extended to the height of the fabric and becomes close to 70 mm (36 mm roller blind + 34 mm entry from the bottom).
Varto turn the roller shutter mechanism into the depths, so that it becomes approximately 36 mm. It is necessary to guard against the edge of the roller shutter mechanism before mowing. Vіd tsієї vіdstanі to lay kut vіdkrittya vіkna.
For the correct adjustment of the width of the roller blind with flat straight lines, it is necessary to adjust the following parameters:
- The width of the cut along the glazing bead stick to the sloping bag (width of the fabric).
- Bead edge width (box width).
- The depth of the bead. It is guilty of buti no less than 10 mm, the fragments of the fabric are not guilty of the buckle pack.
- Bead width. Won may be more than 10 mm, the minimum width of the double-sided adhesive tape for straight lines is 9 mm.
- Height. For the correct tempering of the fabric of the roller blind, it is necessary to expand the width of the glazing bead up to the frame from the bottom to the glazing bead stick to the top of the frame.
Varto raise respect for the depth of the roller shutter box, which can be 36 mm and height 70 mm. It is necessary to guard against the edge of the roller shutter mechanism at the school, the rocks in the middle of the city lie down at the end of the window.
In order to make the roll-curtains of the closed type with P-like straight lines, it is necessary to measure the width on the back. For the correct choice, the width must be specified from the glazing bead stick to the frame from one side, and to the glazing bead stick from the other side - there will be a width of the roller blind along the straight edge. The overall width of the roller shutter will be 20 mm wider for straight lines.
For the correct adjustment of the height of the fabric roller blind, it is necessary to change the size of the glazing bead stick from the bottom to the glazing bead stick from the top. Vіdstan vіd mowing the beast with ramie vikna to the stick of glazing bead tarami (for deaf vicons) must be no less than 35 mm.
Designers appreciate the beauty of roller blinds in modern home interiors. The stench is especially suitable for living quarters, where active people live from a modern look at life. I think it's important that you can choose whether it's a little baby, the design is like a fabric for making.
About those, how to install a roller blind on a plastic window, marvel at the video.
How to choose the roller blinds correctly, so that they look good, aesthetically pleasing, and moreover, practical. For which it is necessary to analyze the specific features of the procedure for vimiryuvannya indicative of the skin appearance of the curtains okremo. Adzhe stink can be vikonanі at kіlkoh vipadkah.
classic
How to win roller blinds on plastic windows in the classic version. For the cob, they are chosen from the method of mounting robots of the future. Slid z'yasuvati, chi installation bude zdiyasnyuvatisya in the openings or on them.
The values will be like this:
- Width (far - “b”) xv - 50 cm, max - 300 cm;
- Height (dalі - "h") xv - 50 cm, max - 300 cm;
- Dovzhina (dali "l") keruvannya xv - 27 cm, no maximum.
The maximum allowable size depends on the skin type of the material individually. DK is not guilty of less than 2/3 of the finished curtain.
Vimiryuvannya main values
Installation call:
- Resign b.
- h blinds lie down in the vіd vіd vіdvіkonnya - as if the stench protrude - vymiryuyut for yoga meanings, as if internal - razmіri dovіlnі.
- b canvases = b curtains minus 4 div.
- The distance between the cordon and the stele is at least 7 cm when installed to the wall.
For the assembly work in the middle, I will open the necessary steps:
- Width "b".
- Height "h".
- Razrakhovuєtsya b canvases with a line of retail between "b" the opening of the opening and a double gap between the bracket and a slope to the side. The minimum value is 5 mm.
Vimiryuvannya for cassette blinds
Cassette roller blinds are:
- Uni-1
(b) take into account the trivality between the ribs of the glazing beads in a vertical position, to an accuracy of 0.01 div.
(h) - the distance between the ribs in a horizontal position, the accuracy is the same. The side of management is chosen by yourself.
Riven is determined individually. Automatically won out 2/3 of the size of the curtains.
Uni 1 blame exactly fit between the ribs of the glazing beads.
- Uni-2
Zdіysnyuyutsya vimіri dimensional expansions. Basically, they are determined by two criteria: the success of the deputy, the specialness of the case. It is important how the fittings are ripped: handles, hinges.
“b” is important as the distance between the bead ribs + 6.8 cm. "h" is important as it is between the lower and upper points of the plug of the direct system (xw - 20 cm, max - 150 cm).
Roll-cassette structures
Mini
How to measure expansion in a Mini-type design:
Installation is carried out directly on the chair of the window. With whom they vimiryuyut b light opening. Add b glazing bead to the mechanism (about 0.4 cm). Other values are calculated in the same way. Dali choose the right side. Rozmir її lantsyuga become 2/3 parts of h.
Like a chair with a turn-and-turn mechanism, a retainer for the lower cornice is additionally installed. Tse dopomozhe robiti airing so that the stools do not hang over the stools.
The fixer of the lower cornice can be with fastenings:
- a way to install magnets on a chair with screws;
- arranging hair with brackets.
To fasten the upper eaves of the trioma in the following ways:
- screws;
- iztosuvannyam special maidanchik on scotch tape;
- suspended brackets - for chairs.
Vymiryuvannya small vicons
Roman blinds
What is the right way to make a windshield for classic Roman curtain designs? Replying to the appointed month of rotting the canvas. Tse mozhe buti solution "to" the opening of the opening, or call - "on" the new one. For the first option, you will need more lanyards, otherwise you will be able to install such a path.
For the installation of Roman firancos, it is necessary to use windows h and b. Pokazniki, yakі otrimali zreshtoy, necessariy vіdkoryguvat advancing path:
- add 15 cm to b;
- up to h add 20 div.
After the completion of the installation work b and h become smaller by 0.8 cm.
Roman firanks
Day of night
How to robiti vimiryuvannya pіd rolled cloth in different installation variations:
- For installation calls. Calculate with a way to the opening at the opening і 150 mm. h = h open + 15 div.
- Middle. Vimiri know the minimum at three points b and h. The height of the opening is the minimum showing. With kutovikh skhila vіdmіtku slacken at the point, de allow to hang the canvas in the future. b = b opening - 5 mm. h = h open.
- on the frame. V_dm_ryayut data from b glazing bead and h ramie. The minimum distance between the fabric and the base of the handle is close to a centimeter. Badges scatter across the fabric.
"Day of nothing"
Features
When choosing left or right-handed systems, it is necessary to create such a control, so that the lancet does not get caught in the process of operation by the handles. This way of managing is simple and ergonomic. The dovzhina of the completing lancet is regulated in fallowness in the vіd vіd vág vlasnik.
If you want to finish the roller blinds, they are simple and cheap, with the turn-and-turn design of the window systems, the stench will not start before the river. Aje, the maximum height of the material, which is recommended, is 150 cm. Price is obviously not rich. With such parameters, a small gap can be made through the expansion of the fastening elements.
Vimiryuyuchi roll systems, carefully consider the details. Tim more, when installed for additional screws.
Behind the locker's bazhanny, the canvas is completed with an upper box, as well as with details directly. Curtains from the appearance of the decorative box are mounted with special elements. With this, it is not necessary to zastosovuvaty spring keruyuchi elements for openings and lance. Vyrobi omissions from ready-to-install kits. The box is fastened to the surface for additional special zatiskachivs, as if they are placed around for all walls.
How to grow vimiri - video for understanding:
Canvases are produced from materials, which are breathed with a stamina to the point of confusion. For kіmnati s pіvschenim vіvnem vologostі vikoristovuyut spetsіlnі types of fabrics. Watching them pass the victorious shield to the pilosos.
Like oil, the silicone aerosol stagnates the mechanism. It is not recommended to use victorious force in robots with spring or lancet mechanisms. The stink to serve up the good hour.
A roller blind is a functional part of the decor. On the vіdmіnu vіd curtains are classical, rollnі, they take a lot less space, they need a minimum of sight, and the smut - they can not lessen the light penetration. Ale nabuvayuchi tsієї fashionable new items, you are guilty of the nobility melodiously what the same rosemіr to you pіdіyde. Too many people are stuck with the problem: how to get the right freeze? At ts_y statti mi magatimymosya with you roz_bratisya, what's up.
How to make the right freeze
It is important to note that the size of the possible rolled curtains should be laid down according to the dimensions of your window, as well as form the structures on the sklopaket. It is important to remember that the purpose of your visions is the designation of the possible parameters of the width of your roller blinds, the shards in the length of the roller blinds are usually about 2 meters (which can be achieved for most of the current models of window designs).
Vimiryuemo vikno
- First, timidly froze the warehouse behind the width and height (stools). Knowing this parameter, let me tell you, what is the minimum for the width and the length of the roller blind (butt, in the photo below).
It is necessary to change the length of the window and the width of the window
In another way, it is necessary to reduce the depth of the glazing bead (the detail is shown in the photo below). Knowing otrimanih data, let us know how the system of the roller blind will be better for us. So if the depth of the glazing bead is more than 1.5 cm - it means you have a system of roller blinds of the “Uni” type (uni). And if the depth of the glazing bead will be up to 1.5 cm (inclusive), then the “Profil” system (profile) or “MINI” (min) will be shorter.
According to the above described manipulations, not only plastic, but standard wooden windows are suitable.
It’s an important honor: watch out that the overall width is important for the width of the curtain, so the cornice or figuratively hanging “tube”, to take revenge on the roll of the curtain in a rolled-up look, and the entire element is wider, the lower is the fabric itself.
Selection of roller blind systems
MINI system
Roller blind MINI is a traditional model on a small shaft. Due to the compactness of the shaft, such curtains can be mounted directly on top of the chair. Fixings are installed, without any mechanical vtruchani, which saves the integrity of the frames, and її aesthetically looking at the future. If you want to wind up a roll at such a curtain, it will appear as if it was hanging over the height of the warehouse, then you can simply cut it in centimeters.
A special metal rail and magnetic trims in such models ensure the fixation of the rolled fabric on the chairs, so that there is no sagging. Magnets are attached to the frame for an additional double-sided stitch. The chairs themselves can, at any given time, bulge out at any flats.
The advantage of the MINI system is the affordable price and compactness, which generates chimals to drink on such curtains. Truth is, a model cannot be provided with a high level of light impermeability. From the sides of the rock, the cracks can be overgrown;
The correct setting for curtains of the MINI system is:
- Measure the slope to the width, then to the height to the chair. Take away data to write in millimeters. Before taking the width value add 30 mm (3 cm), height data - 120 mm (12 cm)
- Also, choose for yourself, de b you wanted to, so that you knew the key mechanism of the curtain (it is recommended to trim the standard norms - so that you pay for the lancet, which you control, white loops)
- Choose one type of fastening (with screws, on a hanging bracket, on a sticky string)
Installation of curtains of the "MINI" system is only for chairs.
UNI system
The system is popular to finish, the shards organically fit practically into any interior, it is handy and practical in operation. It’s good to go for a place, de vzhe є curtains and tulle.
The roll is placed in a special plastic box and is requested for help from a lancet. In this system, the ability to fix the roll on any level is guaranteed. Also, a latch for a lancet was added.
The structure itself is fastened from both sides of the chairs, where metal glazing beads are installed directly, with which the roll stretches when lowered and lifted. It can also be installed on a viconny opening.
The system is subdivided into UNI-1 and UNI-2 tips
UNI-1. It can be operated independently in viconnoi construction, as well as may be friendly looking. Tsya perevaga form before her great popularity. For bajannyam, you can choose the color of the box in one tone from the frame, so that I can take a combination. A typical butt of the UNI-1 system - a roller blind 200x175 is shown in the photo below:
The simulation algorithm for this system is as follows:
- The height is reduced along the edges of the glazing bead + is added to the value of 20 mm (in reserve for the size of the cornice)
- The width is the same along the edges of the glazing bead (nothing is given to the taken value)
Varto indicates that the connection with the simplicity of the UNI-1 design is often guarded against by rubbing the lower part of the curtain (slats) about the slope, which leads to negligible bevels, which means that the gaps are settled. A similar sight is seen there, the depth of the glazing bead is close to 20 mm (2 cm).
- UNI-2. Larger universal subtype, orienting to the solution of problems, rubbing about the slope and the bevel of the lath with the possibility of mounting on the surface, regardless of the "relief". It is suitable for vicons from some kind of clay glazing bead, especially for quiet ones, over 20 mm. Zavdyaki vertical direct P-like shape curtains must be changed into a clear fixation, do not rub and do not squint.
Algorithm vimiru for UNI-2 attacks:
- The height also depends on the standard size + the box height of 70 mm (7 cm) is guaranteed. Fahivtsі recommend bathing viribs with a margin of height of + 10-20 mm (1-2 cm), shards at different pardons with rosemaries, plugs are directly taken and shaped according to height.
Measure the width according to the given dimensions of the direct roller blinds (you need to know in advance which model and which dimensions you want to buy)
Profile System
Such a system is suitable for windows with slight shading frames, rounded or shallow glazing beads (up to 1.5 cm in depth). The peculiarity of the design is that it is mounted on a stand in a warehouse. Directly weave a p-like shape, which will ensure a good fixation of the fabric during the hour of transferring. The control of the curtain is dependent on the help of a special lanyard, and the fabric can be fixed on a matter-of-fact basis.
Correct measurements for this system:
- Vymiryuemo latitude along the horizontal folds from chair to chair.
- The height is reconciled with the improvement of the world, that rock, and all the chairs that show up.
The installation of the “profile” system can be installed on a window opening, on a chair, and it will be installed on the door.
Alternatives
If more than one of the different types of roller blinds is not satisfied with your aesthetic similarities, but if you don’t allow the bazhannya to add blinds on a fabric basis, then you should know that you are out. Im'ya youmu - Roman blinds.
If you don’t shy away from the choice, and the rolled option is just to your liking, then it’s all the same, it’s important to note that for balconies, for example, roller blinds fit badly, protecting the great latitude of the balcony warehouse and its size, and the axis of the Roman blinds fall here to the point of speech. True, for the descriptions below, recommendations are suitable for plastic windows.
Vrahovyuchi ob'єmistіst such a curtain, її installation can zdіysnyuvatisya, like on a chair, so on otvіr, and navit on three or chotiristolkovі vіkna. Golovne here again to conduct a correct measurement:
- Roman curtain on the opening. "Width A" is measured by the width of the fabric. Here there is a trace of the nobility, that the fabric itself of the finished fabric is 20+ mm (insure qiu cost). "Visota V" is simmered until the finished viroba is finished (without additional rozrachunkiv)
Vrakhovuєmo i width and height
- For three-stalled sklopaketіv and more Roman curtains, as a rule, they are swayed, even if they want to make ready-made models. Here they take: a number of folds of the Roman blind behind the height; as well as the results of measuring the lower and upper edges of the curtains in one row to the chairs of the skin veil (so that the rods of the Roman curtains are symmetrical)
On a chair. The latitude is measured along the outer edge of the glazing bead (it’s better to change 20+ mm of the additional latitude to the fabric, moreover, it’s better to turn the stitching of the window handle). The height is reduced to the height of the finished virobu.
On large sloping windows, the problem of the symmetry of the curtains is even more relevant.
Even though the moments of how to determine the dimensions and the installation of roller blinds have not been cleared for you, we recommend that you look at the video lessons and video instructions on the Internet, simply by typing in a joke: "how to die a roller blind."
Navit the most plastic windows to pass the change of light, through the presence of such an atmosphere of the apartment, the booth gradually turns up. One of the modern solutions, which looks ideally practical in any interior, even blinds. The stench nadiyno protect the apartment from the light, miraculously block the sleepy spaces and create the optimal microclimate for a spicy year.
Do not fall into the hands of the widows, if you have to pick up the defenders for the vikons of self-harm. Zrobity vymіri - not such a big problem, smut, you have the right patience that correct pidkhid.
For the understanding of the world, it is necessary to take a metal tape measure. The very vimiryuvalny prilad will give the best result. When vimirah, the work of the robit was as accurate as possible, not rounded to millimeters, and recording the result that would come out.
It is also important to understand that, be it, to inspire the ideal way to make your own mistakes. Therefore, it is necessary to mow down from a few sides. It is important that the measurements were carried out correctly, so that the frame is not perfectly rectangular in shape.
Vimiryuyemo plastic windows for horizontal blinds.
Tі, hto bazhaє pridbati horizontal jalousі, owennі obov'yazkovo pomіryat ramy, schob rozrahuvat the correct rozmіr. Horizontal models - tse, first for everything, one of the most popular types of blinds, which turned out to be even richer for that. The versatility and practicality allowed the problem of window curtains to be solved in a big way. To make a frame for blinds, it is necessary, first for everything, to sign up, how to hang them.
So, if it’s necessary to install them on holes, then we’ll fix it like this:
- freeze the indicators of the height and width of the window opening;
- after the number of vimiriv z otrimanih rozmіrіv vybiraemo tі, yakі є the greatest;
- In order to enter exact data, from the indication of the width it is possible to see 15 cm, and from the indication of height - 1 cm.
Another way to fasten the blinds is to install them on a chair. This method allows you to deprive yourself of free shipping. In this case, it is necessary to freeze the borders on the glazing bead and measure the stool of the lintel, moreover, in decal areas. So, just like in the first fall, it is necessary to choose the largest indicators, and then add 1 cm, and to the old one - 3 cm.
I would like to pay special attention to the varto to add curtains to the system. It is important that the whole structure was folded in such a way that the mechanism for turning the blinds was on the bots, extending to the window handle.
Zamir for vertical blinds
Vertical options for building curtains give charm and frills to create a simple environment. Їx to rob the inter'єr, de need to attach the unevenness of the subcontract, trumpet. Є a number of tricks, yakі varto vrakhovuvat:
- if there is a hundred widths, then there can be a multiple of sixteen, otherwise it is easy to divide on the top;
- ways to install this type of curtains - two, depending on the choice to lay down the technology of the world.
If we choose the way to open the door, then remember that the ideal place for such curtains is small. Furniture in such a state of mind is allowed to be placed under the ceiling. Blinds take up a minimum of space. Such an option is only possible up to vicons and a perfectly even shape.
When you die, follow:
- according to the width, which was used, choose 1 cm;
- according to the height of the choice 2 cm.
Another way to move vertical blinds is “on the openings”. For whom it is necessary:
- measure the window in width and height;
- add 20 cm to the indicator;
- if the blinds are fastened on the stele, then it is necessary to add a gap to the stele from the upper edge;
- If it is necessary to creak the blinds to the wall, then I will need to add 10 cm to the height of the opening and add the height of the structure.
Another popular model is roller blinds. The stinks allow you to improve the situation for the sake of the fact that the stinks occupy a lot of space, and if they turn around, the atmosphere of the room becomes more calm. This type is also called "Roman".
For such options, it is necessary to carry out the simulation in a fallow manner according to the method of their installation.
If the installation seems to be “overlapping”, then it is necessary to freeze in singing order:
- it is necessary to change the parameters of the window - width, height;
- then until we take away the results, add 10 cm for the width and 20 cm for the height.
If it is necessary to install the curtains using the “at the openings” method, then it is necessary to do the following:
- the width of the opening protrudes at the role of the width of the eaves;
- I will open the height to be the height of the curtain in the open look.
With a single mindset of such a setting, the form of the window is correct: as if it were peroxide - a Roman blind cannot be installed.
Another popular method is "day-night". Who needs to regulate the lighting and it is necessary to do this:
- the width of the curtain is equal to the width of the glazing bead;
- height to lie down in the world of window frames.
After vimiriv, you can add about 0.5 cm behind the height - the stench is needed for the eaves.
It is important to signify how you choose to hang blinds. If you want, the stench should be spread at the inner part of the window opening, varto should be washed through the soffit (window beam) to the width of the door. If you want to hang the blinds with a view, then the shape and size of the curtains can be adjusted according to the shape and size of the window.
Vimiryuvannya for installing blinds in the opening
The basic choice for such blinds is to cover the world's width and length of window. Significance is given to the number of areas, shards are given to increase the curvature of the frame. The value of the first vimir is seen to be close to 1.5 cm, and the value of height is 2 cm.
Mounting over the opening
After the width and height of the window opening, it is necessary to add 2 cm to the first indicator, and 5 cm to the other.
Middle mounting
Installation of similar curtains in the middle of the day may be subject to the presence of the correct geometric shape and the correct dimensions. Vikno is not guilty of the mother of chairs. In case of widths and heights, it is necessary to protect the size of beadings.
If you are not sure that you can get in touch with the exact windows for installing blinds, it is recommended that you go to fakhivtsiv, so that you don’t just know the necessary worlds, but also let you know about the curtains.
On the thorny path of progress, people collapse one more important quality - the exercise of comfort. Lyudina wants, sob around her everything was miraculous. However, there is a place, as for the skin, it is of great importance. Moreover, the plan is lucrative, and the plan is aesthetics. Tse budinok, yakomu lives a man.
Paraphrasing the words of a Russian writer, we can say that everything can be miraculous in a people's house: the design of the room, the standard of technology, and the vicon. So the axis of vikna and merit for the rest of the Rozmov.
Vikno is not just a house or apartment, where does that other person live. Vіkna tse shchey pokazan of the fact that you are alive.
What did you spend your days at, walking along the streets of the city, marveling at the windows of strangers, absolutely not knowing people? Shvidshe for everything, you will be positive. And what has screwed up respect in that other okremy century? Here vіdpovіdі can rise. Ale poednaє vsі vіdpovіdі one moment - curtains.
Like the eyes of a booth - tse vikna, then the curtains - tse, without a break, vії. Ask the girl about the importance of beauty and take away the raging opinion about those who are beautiful, the density and other characteristics are even more important for adopting not only the eyes of the person, but the image of a person in a haze.
So with curtains. Not only and not so much an element of decor, like the ability to enhance the beauty and individuality of your booth.
Curtains are different. Prozory tulle or large important curtains. But at the same time, with the development of craftsmanship, at the houses of the most inventive people, more often than not, rolled curtains began to appear at the windows.
What is the right choice of roller blinds?
Roller blinds are called especially design and technical solutions for the design of veils, as if they are placed on the stick of the primary for all fabric types and blinds and the practicality of blinds from the calmness of fabric curtains.
Rolled constructions with a female fabric, as you can close the entire width of the window, so one of the chairs. If necessary, it curls up at the roller, which fixes on the upper plank of the window, or, shoveling along the straight lines, rolls up to the full height of the window and closes it again. It is also possible to close only a part of the window behind additional curtains.
Behind the design of the roller blinds are:
- open type
- closed type
- mini-curtains.
Constructions of the open type are characterized by the simplest system, as a wake-up call, and management. The Danish type is fabric, as it is folded at the roller, which is visible at the upper part of the window and is accessible for a look and the lower one is straight. Zavdyaki vykoristannya lansy or spring control system, it is possible to open the fabric to the height.
Closed-type structures are ventilated in the forward system with a folding structure. Krіm is already known by the system of swag of fabric, the roller and the lower straight, the construction is folded with a box, which looks like a roller of fabric, as well as the presence of a straight line.
The design is given masu masu pluses in the back and front variant: there is more space for the fabric to fit to the surface of the window, so that at your side you can secure the permanent position of the fabric to wind for obvious stretching or change the position of the window chairs. Another great advantage of a closed system is the prevention of sagging fabrics in the aftermath of a permanent defect and the improvement of the control mechanism.
Mini-curtains, behind their ovnishnim look, predict models of a wide type, but with a little difference, for their installation, not the entire width of the window is victorious, but, as a rule, a chair. This type of installation is important for installation on PVC windows, and therefore it is necessary to install it without drilling a cladding package.
How to choose roller blinds for the size of windows?
The choice has a few criteria. All stinks are divided into 3 great groups:
- Design features
- Features of the fabric part
- Rosemary Features
And so the first two groups should consider buying less food from the other: “what would I want?” and can be identified visually as without being in the middle of the place where the purchase is made, as well as from the photos presented in the catalogs of online stores, the third group has an independent participation of fahivtsiv. You can choose the necessary dimensions for installation on your own, or better trust the robots of professionals.
Also, what kind of expansion is necessary to clarify for the installation of rolled structures or other structures?
Width
Oskіlki tsey type is guilty of closing the entire gap of a part of the window, the width of the window of each chair is the main initial maker of the installation.
Vimiryuvannya carried out when installing the finished viroba. Moreover, the widths are due to the step-by-step instructions: the width of the finished veil is to be blamed for being smaller for the transverse opening of the slit by 50 mm, the width of the fabric is less than the rim of the finished veil by 2.5-4 cm, and the height of the wicker opening is for the width of the veil.
The main points that vibrate in the world are: the designation of the width of the structure: from the left edge of the left bead to the right edge of the right bead.
In this hour, there are unknown companies that are engaged in the sale of roller blinds. These sites on the Internet contain anonymous photos of the most famous models.